1、 Instrument usage

The detection microscope can produce upright spatial images when observing objects. Strong stereoscopic effect, clear and wide imaging, and long working distance make it a widely applicable conventional microscope. It is easy to operate, intuitive, and has high calibration efficiency. It is suitable for the inspection of electronic industry production lines, printed circuit boards, welding defects (printing misalignment, edge collapse, etc.) in printed circuit components, single board PC calibration, vacuum fluorescent display VFD calibration, etc. It enlarges the image of the physical object and displays it on the computer screen, and can edit, save, and print the required images. Equipped with measurement software, various data can be measured.

2、 Technical parameters

You can directly observe physical images on the television or computer.

1. Eyepiece

2. Magnification range of objective lens: 0.7-4.5X;
3. Magnification ratio: 6.5:1;
4. Mobile working distance: 200mm;
5. The movement range of the mechanical stage is 75 x 55mm;
6. Total magnification: 7-450X (taking a 21 inch TV with a 2X large objective lens as an example).

3、 System Introduction

Computer based inspection microscope is an organic combination of optical microscopy technology, photoelectric conversion technology, and computer through photoelectric conversion. Thus, we can shift the focus of research in the microscopic field from traditional binocular observation to reproduction through displays, thereby improving work efficiency. And it can edit, save, and print the required images.

4、 System composition

Computer type (ZYC-330E) 1. Inspection microscope 2. Adaptation mirror 3 Digital color camera 4. Data cable 5. Computer (optional)

5、 Reference magnification factor

Computer type (ZYC-330E): 7-320x (taking a 17 inch monitor and 2x large objective lens as an example)