The ZJL type submersible slurry pump is a vertical centrifugal slurry pump that is immersed underwater and used to transport abrasive, coarse particle, and high concentration slurry. It does not require any shaft seal or shaft seal water and can work normally even under conditions of insufficient suction.

The overcurrent components of the ZJL pump are made of wear-resistant metal.

The components of the ZJL pump immersed in the liquid are all equipped with rubber liners, suitable for conveying abrasive slurry without edges and corners.

According to the level of the slurry pool liquid, different lengths of pump drive shafts or suction pipes can be selected.

By adopting multiple speeds and variations, the pump operates under optimal conditions, with a long service life and high operational efficiency, and can meet various harsh conveying conditions.

Working conditions:

Mainly suitable for transporting corrosive, coarse particles, and high concentration slurry. Widely used in metallurgy, mining, coal, electricity, building materials, environmental protection and other sectors.

Structural installation type:

The ZJL type pump is a vertical centrifugal slurry pump, with the pump inlet vertically downward and the outlet vertically upward on the other side of the pump. The pump is mainly composed of lower filter, pump body, impeller, shaft, guard plate, bracket and other parts. The upper part of the pump is supported by bearings; The pump is installed underwater without any shaft seals, and the overcurrent components are made of wear-resistant materials.

The transmission types of this pump are BD and DC, namely belt drive and direct drive. The depth of immersion in the liquid can be determined within the standard size range according to the actual needs of the user.

Due to limited pages, we only provide partial parameters. If you need detailed information, please contact our technical staff at:!