This waste paper baler has thicker oil cylinders compared to the previous models, increasing the internal size of the cylinder from 220mm to 250mm, and correspondingly increasing the thickness of the steel in the design. It's equivalent to using a 10 ton truck to pull 5 tons of goods, so this waste paper baler is durable and long-lasting.
Host frame system: A sturdy frame made of high-quality thickened steel plate with gas filling and welding protection, and advanced mechanical design for long-lasting durability of the equipment.
Conveyor system: Excellent thickened I-beam frame, high-strength steel plate conveyor belt.
Hydraulic system: Key components such as hydraulic pumps, solenoid valves, and hydraulic cylinder oil seals are imported, resulting in high packing pressure, fast speed, durability, and low noise.
Electric control system: Siemens motor and original Mitsubishi PLC programming controller are used. Other key components such as buttons, sensors, infrared sensors, and remote control systems are imported, making them easy to operate and maintain.
Security alarm system: Program controls five safety automatic locking shutdown alarms. Automatic shutdown alarm in case of equipment misoperation, power supply phase loss, power phase sequence error, excessive pressure, or personnel entering the packaging port by mistake.
Main structure: The Y82T-120Q vertical baler consists of eight parts: frame, frame, hydraulic control system, main oil cylinder, fuel supply system, electrical control system, hydraulic cylinder, and hydraulic lock box.
Main specifications and technical parameters:
1. Rated pressure of 800 kn
2. The main oil supply system has a hydraulic pressure of 20 to 25 MPa
3. Hydraulic cylinder pressure 8 MPa
4. Installation dimensions (length * width * height) 1200 * 1000 * 800 millimeters
5. Package weight 200-200 kilograms
6. Installed capacity and power: 11KW
7. Weight and mass of the whole machine: 3T soil
Rack: The rack system consists of columns, lower crossbeams, middle crossbeams, upper crossbeams, etc. The column links the upper and lower beams to support the entire packaging frame column, so high-quality steel is selected to ensure sufficient strength under complex loads.
Box:
Packing boxes are divided into loading boxes and compression boxes. The box door is controlled by a locking cylinder, such as uranium connected by hinges. Due to the cylinder being locked tightly, loosening the lock on the door makes it easy to open and come out.
Place a bag on the base assembly and floor through steel plate processing, equipped with a soldering iron, making it easy to wear and bundle.
Hydraulic control system:
The system consists of an oil tank, a plunger oil pump (YCY-14-80 type), an electric pump set, a multi way directional valve, oil pipes of the oil cylinder, and actuators, using hydraulic oil exceeding 46 #.
This system uses the electrical part to control each working action of the packaging machine.
Main oil cylinder:
The main cylinder plug has a diameter of 160 millimeters and a cross-sectional area of 251 cm2 for packaging. The packaging machine has a total pressure of 800 kn. Move the plunger stroke limit switch from the line.
The main oil cylinder system consists of a main oil cylinder, piston, sealing ring, guide ring, end block, etc., with good sealing performance.
The piston in the cylinder is welded with seamless steel pipe, which has sufficient strength. The piston inside the cylinder moves back and forth. When the piston rises, it will propagate force to compress the object in the top block of the box.