VIP member
XK6140 CNC horizontal lifting desktop milling machine
Introduction - Structural characteristics of CNC horizontal lifting desktop milling machine: 1. The milling machine has good structural rigidity, and
Product details
The structural characteristics of CNC horizontal lifting desktop milling machine:
1. The milling machine has good structural rigidity, and the spindle is gear driven, which can carry heavy loads for cutting.
2. The milling machine adopts a semi enclosed protective cover.
3. The milling machine spindle motor has high power, wide speed range, and fully utilizes the tool efficiency, allowing for high-speed cutting.
4. Milling machineWear prone castings are made of vanadium titanium wear-resistant castings, important transmission parts are made of high-quality alloy steel, and the sliding guide rail contact surfaces are all importedPolytetrafluoroethylene plastic is scraped by professional technicians to ensure the durability and stability of the machine tool.
5. Milling machineHaving a comprehensive lubrication system. The ball screw and sliding guide rail are both equipped with adjustable oil separators, which supply oil through an electronic oil pump to ensure timely and accurate supply of various oil circuits.
6.This milling machine can be equipped with a CNC fourth axis, and the system can achieve four axis three linkage.
7.Thicken the diameter of the lifting ball screw to60mmEnhance its rigidity and improve its load-bearing capacity.
8.ZThe shaft adopts a brake servo motor, and a collision bar is installed at the bottom of the lifting platform to ensure that the lifting platform will not fall to the bottom and damage the machine tool in extreme situations such as power failure or belt breakage.
CNC horizontal lifting desktop milling machineMain technical parameters:
|
|
Project Name |
unit |
parameter |
|
work make, do, create, compose, write, etc. Taiwan |
Working area (width)*Length) |
mm |
400*1700 |
|
TType groove (number of grooves)-width*Distance) |
mm |
3-18*90 |
|
|
Large load-bearing capacity |
kg |
600 |
|
|
TNumber of slots |
|
3 |
|
|
TSlot width |
mm |
18 |
|
|
TSpacing between grooves |
mm |
90 |
|
|
itinerary |
Larger longitudinal travel |
mm |
900 |
|
Large lateral travel |
mm |
250 |
|
|
Large vertical travel |
mm |
350 |
|
|
spindle |
Spindle taper number |
|
IOS（7：24）No.50 |
|
Spindle motor power |
kw |
11 |
|
|
Spindle speed series |
levelStnep |
18 |
|
|
Spindle speed |
rpm |
1450 |
|
|
Main spindle speed range |
rpm |
30-1500 |
|
|
The distance between the spindle centerline and the vertical guide rail of the bed is relatively small/larger |
mm |
30/410 |
|
|
enter give |
Servo motor torque |
N.m |
X:10 Y:10 Z:23 |
|
feed rate(X/Y/Z) |
mm/min |
3-1000 |
|
|
Fast moving speed |
mm/min |
5000/4000/3000 |
|
|
essence degree |
Repetitive positioning accuracy |
mm |
0.02 |
|
定位精度 |
mm |
0.035 |
|
|
Main CNC system |
|
Huazhong CNC |
|
|
CNC rotary worktable (disc)/Top notch) |
mm |
160 |
|
|
Cooling pump motor power |
kw |
0.125 |
|
|
Machine tool dimensions (length)*wide*High) |
mm |
2556*2159*1830 |
|
|
Net weight of machine tool |
kg |
3900 |
|
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-