VIP member
XDW-60 Rubber Low Temperature Brittle Testing Machine
XDW-60 Rubber Low Temperature Brittle Testing Machine
Product details
1、 Characteristics and Applications:
XDW-60 rubber exhibits low-temperature brittlenesstesting machineThe highest temperature at which the vulcanized rubber sample fails under specified conditions due to impact, known as the brittle temperature, can be used for comparative identification of the performance of plastics and other elastic materials under low temperature conditions. It can also determine the brittleness temperature and low-temperature performance of vulcanized rubber with different rubber materials or formulations. Therefore, quality inspection of scientific research materials and their products, control of production processes, and other aspects are indispensable.
The technical indicators of this specialized testing machine for plastics and rubber comply with the requirements of national standards such as GB/T 1682-1994 Low temperature brittleness single specimen method for vulcanized rubber. In the original design of this instrument, a cold well agitator has been added to make the temperature around the container more uniform, decrease the temperature faster, save time, and reduce energy consumption.
2、 Technical parameters
1. Temperature control range: -60 ℃
2. Cooling rate: about 2 hours
3. Impact velocity: 2m/s ± 0.2m/s
4. After constant temperature, the temperature fluctuation within 3 minutes of the experiment: ＜ ± 0.5 ℃
5. Distance from the center of the impactor to the lower end of the gripper: 11 ± 0.5mm
6. Dimensions: 720 × 700 × 1380mm
7. Power: 1100W
8. Cold well capacity: 3L
IIIStructural principle
1. Lift gripper
The lifting gripper consists of a cylinder with a gripper and a cylinder seat.
The distance from the impact site of the specimen to the lower end of the gripper is 11.0 ± 0.5mm
2. Impact device
The impact device consists of an impactor and an impact cylinder.
3. Impactor
The shape and size of the impactor head. The weight of the impactor is 200 ± 20g, and its working stroke is 40 ± 1mm. In the reset state of the impact cylinder, the distance from the end of the impactor to the specimen is 25 ± 1mm.
XDW-60 rubber exhibits low-temperature brittlenesstesting machineThe highest temperature at which the vulcanized rubber sample fails under specified conditions due to impact, known as the brittle temperature, can be used for comparative identification of the performance of plastics and other elastic materials under low temperature conditions. It can also determine the brittleness temperature and low-temperature performance of vulcanized rubber with different rubber materials or formulations. Therefore, quality inspection of scientific research materials and their products, control of production processes, and other aspects are indispensable.
The technical indicators of this specialized testing machine for plastics and rubber comply with the requirements of national standards such as GB/T 1682-1994 Low temperature brittleness single specimen method for vulcanized rubber. In the original design of this instrument, a cold well agitator has been added to make the temperature around the container more uniform, decrease the temperature faster, save time, and reduce energy consumption.
2、 Technical parameters
1. Temperature control range: -60 ℃
2. Cooling rate: about 2 hours
3. Impact velocity: 2m/s ± 0.2m/s
4. After constant temperature, the temperature fluctuation within 3 minutes of the experiment: ＜ ± 0.5 ℃
5. Distance from the center of the impactor to the lower end of the gripper: 11 ± 0.5mm
6. Dimensions: 720 × 700 × 1380mm
7. Power: 1100W
8. Cold well capacity: 3L
IIIStructural principle
1. Lift gripper
The lifting gripper consists of a cylinder with a gripper and a cylinder seat.
The distance from the impact site of the specimen to the lower end of the gripper is 11.0 ± 0.5mm
2. Impact device
The impact device consists of an impactor and an impact cylinder.
3. Impactor
The shape and size of the impactor head. The weight of the impactor is 200 ± 20g, and its working stroke is 40 ± 1mm. In the reset state of the impact cylinder, the distance from the end of the impactor to the specimen is 25 ± 1mm.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-