VIP member
Wastewater purification and separation equipment
① - Diagonal sedimentation tank, ② - Pneumatic double diaphragm pump, ③ - Sewage pump, ④ - Chemical mixing tank
Product details
product image
|
|
|
|
|
|
|
|
Product Introduction
Instructions:
① - Diagonal sedimentation tank, ② - Pneumatic double diaphragm pump, ③ - Sewage pump, ④ - Chemical mixing tank
⑤ - Filter press, ⑥ - Electromagnetic valve, ⑦ - Electric contact point pressure gauge 1.6MPa
⑧ -2-inch butterfly valve, ⑨ - connecting pipeline, ⑩ -2.5-inch elbow, ⑪ - corrugated pipe
⑫ - Sewage inlet, ⑬ - purified water outlet, ⑭ - purified water overflow outlet, ⑮ - sewage sludge outlet
⑯ - Repair port.
⑧ -2-inch butterfly valve, ⑨ - connecting pipeline, ⑩ -2.5-inch elbow, ⑪ - corrugated pipe
⑫ - Sewage inlet, ⑬ - purified water outlet, ⑭ - purified water overflow outlet, ⑮ - sewage sludge outlet
⑯ - Repair port.
1： Diagonal sedimentation tank:
1: Product model: HF-XG-2V
2: The overall structure is made of material: 304
3: Overall volume=2m ³ (including sewage volume of 1.6m ³ and purified water volume of 0.4m ³)
4: The chemical reaction time of the wastewater in the inclined tube sedimentation tank is controlled between 30 and 60 minutes.
5: The aperture of the inclined tube (net distance of the inclined plate) is 80mm, the length is 1m, and the inclination angle of the inclined tube is 60 °.
2： Liquid mixing tank：
1: The overall structure is made of material: 304
2: Composition: Box body, mixer (0.37KW), metering pump (0.48L/H)
3: Capacity 100L
4: The inlet of the inclined pipe sedimentation tank sewage is synchronized with the dosing of the metering pump.
5: Dosage ratio: This equipment uses 30% polyaluminum chloride powder, and it is recommended to use a 3% ratio for the mixing tank (with a mud water content of 15%<) (due to differences in mud water content among manufacturers, it can be customized by the user based on actual conditions).
3： Filter press:
1: Product model: XMY3/500U
2: X - Box type
3：M--- 明流
4: Y -- Hydraulic:
5: U - indicates that the filter plate material is polypropylene
6: Filter plate specifications, 500 * 500 * 50:
7: P represents the filtering area, 3m ²
8: Filter medium: filter cloth.
Our company's filter press consists of five main parts: frame part, filtration part, hydraulic part, discharge device, and electrical control system.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-