VIP member
WPS-M-A2T Heavy duty Wire Encoder
Adapt to various harsh environments; Heavy industrial grade design, no lagging, uniform force, stable performance; Using imported steel wire from Japa
Product details
Specification and Technical Parameters Table of Displacement Sensor:
|
Sensor model (sensor) |
WPS-M - (Effective Travel) - (Output Signal) |
|
Measurement stroke (FullStroke) |
0~2500mm optional |
|
Output Signal Mode |
Analog voltage, current signals, encoder pulse signals, etc |
|
Linearity |
(stand class)±0.25%F.S； （precision class）0.1%F.S |
|
Repeatability |
±0.02%F.S |
|
Output Resistance |
5KΩ（±10%） |
|
Rated power (powerrating) |
（Stroke500mm）1W/40℃； （stroke1000mm）2W/40℃ |
|
Recommended Input Voltage |
Maximum 30V (DC) 12V-24V |
Institution specifications/usage environment:
|
Wire diameter specification |
Nylon wrapped with a diameter of 1.2mm |
wire |
5.5mm in diameter and 1m in length |
Operating temperature |
-20℃~+70℃； Limit -35 ℃~+100 ℃ |
|
Maximum reciprocating speed |
500mm/sec |
weight |
＜500g |
Storage temperature |
-20℃~+80℃ |
|
amplitude |
10Hz-2000Hz,10G |
pull |
＜500g |
Protection level |
IP65 |
Installation precautions:
1. Use the installation bracket or bottom plate with 4 fixed screw holes, and install directly in the correct orientation according to the needs of the site and machine installation space facilities
2. During installation, attention should be paid to the angle of the traction rope, that is, try to make the traction rope slide in a straight line along the X-axis direction of the XYZ coordinate space from the outlet to the moving part of the mechanism, and try to maintain the minimum angle deviation (allowable deviation ± 3 °) to ensure measurement accuracy and the service life of the traction rope. When installing vertically with a long stroke, it is recommended to install the rope ruler body at the lower part and pull the rope upwards.
3. The traction rope is made of stainless steel and should not be damaged by external forces such as cuts, burns, or impacts; Excessive dust, debris, and acidic or alkaline environments can damage the traction rope. Therefore, it is necessary to protect the traction rope when necessary.
4. If the displacement sensor is not installed in front of the workbench or fixed seat, do not pull out the traction rope with your hands or other objects and let it bounce back instantly. This may cause the traction rope to break, damage the sensor body, and even harm people's eyes and personal safety.
The instantaneous acceleration of the traction motion of the product should be ≤ 2 meters per second. The absolute speed is ≤ 1 meter/second. Exceeding the above speed and acceleration range will reduce the reliability and service life of the product, and even cause the traction rope to break. Our company does not assume any responsibility beyond this range.
If used for non linear motion mechanisms, please install appropriate pulleys to constrain curved motion to linear motion.
Note: Purchasing this product entitles you to two years of free repair service. Damage caused by failure to follow the instructions or unauthorized disassembly or modification is not covered by the warranty.
Installation dimension diagram:
Product actual photo:
Tag:  Pulling rope displacement sensor
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-