Shanghai Jinlan Instrument Manufacturing Co., Ltd
Home>Products>Vortex mixer (single adapter)
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    13621789750
  • Address
    7F, No. 37 Gucun Industrial Park, Baoshan District, Shanghai
Contact Now
Vortex mixer (single adapter)
1、 Overview: The vortex mixer uses an internal motor to rotate periodically multiple times, rapidly driving the oscillation and mixing of liquid, semi
Product details
1、 Overview:
The vortex mixer uses an internal motor to rotate periodically multiple times, rapidly driving the oscillation and mixing of liquid, semi liquid and other experimental reagents, and extracting the desired experimental results. Suitable for applications in chemical analysis, biological genetics, medical and pharmaceutical biotechnology. The Jinlan series vortex mixer uses integrated engineering materials for the casing, with no paint spraying on the surface, acid and alkali resistance, collision resistance, and easy cleaning. The workspace uses rubber panels that are wear-resistant and slip resistant. The overall model is small in size, lightweight and easy to extract, with low power consumption, low noise, stable and long lifespan, and fast results.

2、 Product features:
■ Wide application range, suitable for mixing specimens in containers such as test tubes, flasks, centrifuge tubes, etc.
Easy to operate, stable performance, and wide adaptability.
Low noise, high-performance AC motor ensures rapid and thorough mixing.
Jogging and continuous dual-mode switching, flexible operation (except for - B).
Adjust the oscillation speed according to the operator's pressure level (except for - B).

3、 Technical parameters:

model XH-B XH-C
Operating diameter 3.6mm 3/4mm
rated speed 2600r/min 2800r/min
working mode continuous Jogging, continuous
Working face size Φ100mm Φ55mm
output power 12W 30W
power supply voltage AC220V±10%(50/60Hz)
Allow relative humidity 80%
Protection level IP21
Allow ambient temperature 5-50℃
Overall dimensions 100*130*135mm Φ110*150mm
Whole weight 2.5Kg 2.8Kg
4、 Operating instructions:
Fix the instrument horizontally on the workbench, press the power switch, and turn on the power.
■ Jogging mode selection: Switch to gear I and adjust the speed clockwise from slow to fast.
Continuous mode selection:Switch to gear II and adjust the speed clockwise from slow to fast.
5、 Attention:
The equipment should be placed on a smooth and flat tabletop, free from acid and alkali, and without standing water. It is most suitable for placing on a glass tabletop. The bottom of the equipment is equipped with rubber foot pads. Gently press the equipment to fully integrate and suck the instrument with the table.
The equipment uses AC 220V AC power supply. Press the surface power switch and the equipment will start running. Handheld triangular bottles, test tubes, etc. are placed on a sponge surface, and slight pressure is applied. The reagents in the triangular bottle of the test tube will generate vortices, while bubbles of varying heights will form in the triangular bottle test tube, achieving the effect of oscillation and mixing. Do not allow liquid to flow into the movement to avoid short circuits and damage to the equipment.
If it is found that the device is not functioning properly after turning on the power switch, disconnect the power, check if the plug contact is good, and if the fuse is blown.
After the experiment, pay attention to proper storage and place it in a dry, ventilated, and acid free storage cabinet. Clean the surface promptly.
Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!