1、 Characteristics of vibration transmitter products:
The vibration transmitter integrates traditional vibration sensors and precision measurement circuits to achieve a high-precision vibration measurement system. This product can be directly connected to PLC, DCS and other systems for use.

2、 Detailed information of vibration transmitter:
The vibration transmitter integrates traditional vibration sensors and precision measurement circuits to achieve a high-precision vibration measurement system. This product can be directly connected to PLC, DCS and other systems for use. Vibration sensors, vibration transmitters, and integrated vibration transmitters are mainly installed on the bearing covers of various rotating mechanical devices (such as turbines, compressors, motors, fans, and pumps), and can measure vibration velocity or amplitude. It is a transmitter that generates output signals by cutting magnetic field lines with a moving coil, so it only requires a DC24V power supply during operation, and is easy to install and maintain. It has been widely used in thermal power plants, cement plants, water pump plants, mill equipment, paper mills, machinery plants, fan plants, coal mining machinery, etc.
Mainly used for early diagnosis of faults in rotating machinery or laboratory improvement of products to provide improvement basis, preparing enterprises for maintenance in advance, reducing the occurrence of accident hazards, and improving work efficiency!

3、 Technical specifications of vibration transmitter
*Sensitivity: 20mv/mm/s ± 5% 30mv/mm/s ± 5%, 50mv/mm/s ± 5%
*Frequency response: 5-1000Hz
*Natural frequency: 10Hz
*Measurement range: 1. 0-10mm/s 0-20 mm/s 0-50 mm/s
2、0～100um 0～200um 0～500um

*Signal output: Standard current of 4-20mA (if not specified by the user, the two-wire system shall prevail at the factory)
*Output impedance: ≤ 500 Ω
*Power supply: DC24V
*Maximum acceleration: 10g
*Installation method: Vertical or horizontal installation on the measured vibration source
*Operating environment: Temperature range of -40 ℃ to 65 ℃, relative humidity ≤ 90%