steel frame

The steel frame is made of 60mm x 40mm x 1.2mm square tubes and treated with EPOXY spray coating. The height adjustment is made using M10mm screws (electroplated) to adjust the height by no less than 10mm. The overall structure is bottom supported, which is characterized by strong load-bearing capacity.

countertop

Adopting 12.7mm thick high-quality acid and alkali resistant laboratory specific Xima solid core physical and chemical board countertop, with double-layer thickening on the upper edge to prevent liquid backflow, the total thickness reaches 26mm, and the countertop color is black.

cabinet body

Adopting 18mm thick double faced melamine board, the cross section of the board is uniformly made of 1.2mm thick high-quality PVC high-temperature edge sealing and waterproof treatment, and it is movable and detachable; All panels adopt a detachable three in one connection, with a stable structure, no deformation, good load-bearing performance, and easy dismantling, which is conducive to use in the special working environment of the laboratory.

door panel

16mm thick medium fiber density board is used, and the cross-section of the board is uniformly treated with 2.0mm thick high-quality PVC high-temperature edge sealing for waterproofing, with no joints on all four diagonal sides.

Table top

Adopting 12.7mm thick high-quality acid and alkali resistant laboratory specific Xima solid core physical and chemical board countertop, with double-layer thickening at the lower edge, the total thickness reaches 26mm, and the countertop color is black.

fluorescent lamp

Two 40W explosion-proof fluorescent lamps are concealed under the panel, ensuring a brightness of no less than 500LUX on the working surface and not in contact with the airflow inside the detoxification cabinet

fan

Including air ducts, elbows, and three-way pipes, 380V550W anti-corrosion centrifugal fan, air volume 15m3/min

technology

indicator

Exhaust air volume: 1000-1300M3/h; Noise:<65dB Wind speed: 0.6-0.8m/s; Integrated control of water, electricity, gas and ventilation can meet the requirements of various laboratories for water, electricity, gas and ventilation.

flow guide plate

Using 6mm thick anti double special plate, resistant to strong acid and alkali corrosion, and high temperature resistance. When fixing the inner lining plate and guide plate, a rivet free design is adopted, and special anti-corrosion materials are used for connection. There should be a fixed experimental frame and distillation device inside.

overhead door

6mm thick safety explosion-proof tempered glass, which can slide freely, stop at any position, and horizontally open the glass window. The design is equipped with an airflow barrier to prevent gas from escaping.

control circuit

Adopting high-quality integrated circuit control integrated touch panel, adjustable fluorescent lamp and fan switch. Efficient and easy to use.

hand in hand

Adopting EPOXY treatment of molded aluminum alloy material, it has a beautiful appearance, humanized design, corrosion resistance, and acid and alkali resistance.

hinge

Adopting a branded laboratory specific anti-corrosion hinge, it has good elasticity, beautiful appearance, no noise during use, and can automatically close the door panel at small angles without having to manually close it one by one.

socket

Adopting a laboratory specific 220V three plug electrical socket, suitable for various instrument plugs, safe and durable.