Product Introduction

The CAST/SV-300 vacuum embedding machine can eliminate air contained in the sample. If there is no air present, the embedded compound will fill the gaps in the sample, eliminating the gaps between the sample and the compound. Therefore, edge preservation is strengthened, and fragile samples are well supported during grinding and polishing processes.

A sturdy vacuum pump can provide sufficient vacuum to quickly remove any air trapped in porous samples. By utilizing the unique rotating cup holder inside the vacuum container, multiple samples can be vacuum impregnated at the same time.

Design a unique pouring mechanism that allows pre mixed inlay compounds to be placed in the cavity and then poured into the mold in one go. Suitable for embedding (cold) compounds of various epoxy resins and polyester castables. Due to the sample being encapsulated in a vacuum state, the possibility of air entering is eliminated.

Easy to use:

Place the sample mold in a vacuum container

After mixing the embedded compounds, place the mixing cup on the cup holder and place the vacuum container on the base

Pour the inlay compound into the mold, keep it for one minute after pouring, and then turn it to atmospheric pressure;

Repeat the cycle several times, open the chamber, and allow it to solidify normally.

Technical Specifications

Standard configuration: