VIP member
UV Preprocessor
Product application: The UV pre-processing machine is mainly used to adjust the parameters and performance of a series of photovoltaic modules in the
Product details
| Equipment model | Studio size (D * W * H) mm | Dimensions (D * W * H) mm |
| LRHS-5980-NGF | 2300×1300×2000 | Approximately 2800 × 2500 × 2400 |
| sexually ability finger treetop |
Effective irradiance area | 2000mm×1000mm |
| Light intensity range | 150~250W/m2 | |
| spectral range | 280~400nm | |
| UVB/(UVA+UVB) | 3~10% | |
| Non-uniformity | ≤±15% | |
| Sample temperature range | 60±5℃ | |
| Sample temperature uniformity | ≤±5℃ | |
| send use material material |
External material | 1.2mm cold-rolled steel plate double-sided spray coating |
| Inner box material | 1.0mm thick SUS304 stainless steel, with solar simulated total reflection reflective film attached to the side wall, used for secondary sealing and optical reflection control | |
| Insulation material | 10mm thick high-quality insulation material | |
| pit the heart join in marriage place |
controller | Siemens PLC module+touch screen |
| Cooling method | Air cooled/water-cooled refrigeration | |
| compressor | Taikang, France | |
| Heating method | Nickel chromium alloy electric wire heater | |
| Standard configuration | UV probe, temperature sensor, lighting lamp, lead hole, etc | |
| Safety protection | Emergency stop button, sample surface temperature too high, light source system fault alarm, power phase loss/undervoltage/overvoltage/leakage protection, fan overload, compressor overvoltage/overheating/overcurrent, heating wire overheating protection | |
| supply voltage | AC380V±10% 50Hz | |
| Power | 20.0kW | |
| Usage environment | 5℃~+35℃ ≤75% RH | |
| Note: 1. The above data were measured under good ventilation conditions at an ambient temperature of 25 ℃ 2. Non standard customization can be made according to specific user testing requirements 3. This technical information is subject to change without prior notice |
||
Online inquiry
