VIP member
UFZ-52 Magnetic Flip Plate Liquid Level Gauge
Overview of UFZ-52 High Voltage Magnetic Float Level Gauge The magnetic float level gauge mainly consists of two important parts: the on-site indicati
Product details
Overview of UFZ-52 High Pressure Magnetic Float Level Gauge
Magnetic float level gaugeIt mainly consists of two important parts: the on-site indication part and the auxiliary device. Users can also freely choose the indicated part separately. This series of liquid level gauges requires high sealing performance, including leak prevention and suitability for more corrosion-resistant, high-pressure, and high-temperature applications. It compensates for the shortcomings of other glass level gauges that are prone to damage and have poor clarity. The measurement range can be from less than one meter to more than ten meters, and there is no place that cannot be tested in reality. In addition, it can be equipped with insulation jacket type, alarm switch, and remote transmission device outdoors, displaying data very clearly and the testing range is also very large. Because the part where the data is displayed during the measurement process does not directly contact the medium, it can better display the super performance for high-pressure, toxic, harmful, strongly corrosive media, and high-temperature media. Its design is reasonable and allows for maintenance and replacement of components without affecting production. It is different from the traditional glass level gauge, with reliability, progressiveness, practicality and safety.
The high-pressure magnetic float level gauge, liquid level remote transmission device, and liquid level gauge switch are used together to control and display liquid level data remotely. At present, this type of liquid level gauge is mainly used in industries such as power, chemical, metallurgical, environmental protection, construction, petroleum, food, etc. The above overview is hoped to be helpful to everyone.
Working principle of UFZ-52 high-pressure magnetic level gauge:
The magnetic float level gauge is developed based on the principle of buoyancy and the action of magnetism. When the liquid in the container being tested rises, the magnetic float in the body tube of the level gauge also rises and falls, and has good control performance in the future working process. The permanent magnetic steel inside the float is transmitted to the indicator of the magnetic flip column through magnetic coupling, driving the red and white flip columns to flip 180 degrees. When the liquid level drops, the flip column changes from red to white, indicating that the actual height of the medium inside the container will also be displayed on the liquid level display differently. If an alarm is needed, an alarm switch can be added, and the position can be adjusted. If the instrument room requires continuous signals, remote transmission devices can be added. Output 4-20mA analog signal and transmit it remotely to the instrument room.
Main technical parameters of magnetic flip board:
1、 UFZ-52 magnetic flap level gauge type, can be equipped with MY type level transmitter to achieve digital/analog display of liquid level signal remote transmission.
2、 The structural principle of MY type belongs to the analog liquid level transmitter, which consists of a liquid level sensor and a signal converter. The liquid level sensor consists of several reed switches and several resistors installed inside a φ 20 stainless steel protective tube, which is fastened to the outside of the measuring tube (main tube); The signal converter is composed of electronic modules and is placed in an explosion-proof junction box at the top or bottom of the sensor
3、 Main technical parameters
1. Range: 300-19000mm
2. Error: ± 10mm;
3. Output signal: 4-20mA.DC (two-wire system);
4. Load resistance: ≤ 550 Ω;
5. Power supply voltage: 24V DC;
6. Outlet: M20 × 1.5 (internal);
7. Environmental temperature: -40 to+60 ℃;
8. Explosion proof grade: dIIBT1-4;
9. Shell protection level: IP65.
Installation and usage precautions
Welding slag, magnetic conductive substances, and other impurities are not allowed to exist inside the measuring tube.
When installing the float into the measuring tube, pay attention to the arrow markings and do not invert it.
When conducting overall pressure testing or welding of the equipment, the float should be removed.
When the liquid level gauge is put into operation, it should be avoided that the liquid quickly enters the measuring tube to prevent the rapid rise of the float, which may cause the indicator tube (plate) to track poorly.
When the liquid level gauge is used for a long time under high temperature (>120 ℃) conditions, if it is found that the indicator tube (plate) is not tracking properly, first check whether the magnetic steel has demagnetized. If demagnetized, it should be replaced in a timely manner.
-
Ordering Instructions
Please indicate the parameters according to the selection table, which can be explained in text
◎ Indicate the medium name, liquid receiving material, working temperature, working pressure, and medium density
◎ Please indicate the H value for top installation
◎ Please specify special requirements separately
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-