Transfer of multiple sets of second-hand three effect evaporatorsIt is a natural circulation concentrator that operates under a vacuum system. This product is a universal concentration device. It can evaporate both aqueous solutions and solutions for recovering organic solvents, and can be operated under vacuum or atmospheric pressure. Single effect concentrators can be widely used for evaporation and concentration of water or organic solvent solutions in industries such as medicine, food, chemical, and light industry. Specially suitable for low-temperature continuous concentration of thermosensitive substances (such as water, alcohol extracts, antibiotic fermentation, milk, juice, etc.) under vacuum conditions, ensuring product quality/Transfer of multiple sets of second-hand three effect evaporators

The three effect falling film evaporator has the following structural characteristics: 1. To prevent material contamination, all parts in contact with the material are made of high-quality stainless steel plates. 2. In order to improve the separation effect of vapor and liquid, and also have the functions of defoaming and anti entrainment, the capture mode of this equipment is that the vapor and liquid tangent enters the concentrator to use centrifugal force and sedimentation in the tank, so that the material liquid for foam production can also achieve satisfactory separation effect. 3. For easy cleaning, a quick opening top cover is installed on top of the heater. And a manhole is installed in the evaporation tank for cleaning the inside of the tank. 4. For easy observation during operation, sight lights and mirrors are installed on the top of the heater and evaporator tank.

This equipment mainly consists of a heating chamber, an evaporation chamber, a condenser, a separator, etc. It can be used for the process needs of liquid evaporation and concentration in industries such as Chinese and Western light chemical industry, and can withstand the corrosion of some organic solvents. It has the advantages of no pollution, high efficiency, and easy operation. The cylinder material is made of 06Cr19Ni10 and undergoes internal mirror polishing and external matte treatment. Polish the weld seam flat and use rock wool as insulation material [3]. Characteristics: This tank has the advantages of energy saving, strong production capacity, easy cleaning, and simple structure. ② It has a long service life, high hardness, safe transportation, and guaranteed quality. ③ The evaporation chamber is equipped with an automatic rotating cleaning ball to ensure thorough cleaning. ④ The device adopts mechanical seal with good sealing performance. ⑤ The equipment is made of SUS304 stainless steel, which has excellent corrosion resistance and anti-corrosion performance. ⑥ This device ensures pollution-free, high efficiency, and easy operation

This utility model relates to a new device for the production of Chinese food, health products, and chemical industry. It consists of a first effect tube heater, an evaporation chamber, a second effect tube heater, a concentration pot, a condenser cooler, a vacuum solvent recovery tank, and (plate heat exchanger, vacuum buffer tank). The equipment connection is made by connecting the secondary steam port of the first effect external circulation concentrator to the second effect heating chamber and the condenser through pneumatic valves. Different production methods (dual effect or single effect) are adopted according to different production scales and requirements. In dual effect production, the secondary steam from the first effect (with a vacuum degree of 0.04 Mpa and a liquid temperature of over 80 degrees) is used to supply the second effect concentration heating (with a vacuum degree of 0.08 Mpa and a liquid temperature of over 60 degrees). When producing high specific gravity paste, it can be used as required: when the first effect production paste has a specific gravity of about 1.2, it can be further concentrated in the second effect combination and concentrated to reach about 1.4, and the paste can be produced. It can fully achieve energy-saving effect in the production process. By utilizing the advantages of short production time, fast speed, and easy operation in single effect single unit production, and effectively utilizing energy (preferably using single effect when the extraction liquid temperature is around 90 degrees Celsius, the concentration vacuum degree is -0.08Mpa, and the boiling point temperature is 60 degrees Celsius), the advantages of single effect can be fully utilized to alleviate urgent production needs. The large area of the condenser cooler can be used for single effect or combined concentration production in a single unit. Simultaneous production in two units is single effect production. If the solvent is recovered, it can be operated through the plate buffer tank in the vacuum protection system.

Low price transfer of second-hand concentrated evaporators. Evaporators can be classified into three types based on operating pressure: normal pressure, pressurized, and depressurized. According to the motion of the solution in the evaporator, there are: ① circulation type. Boiling solution passes through the heating surface multiple times in the heating chamber, such as circulation tube, suspended basket, external heating, Levin type, and forced circulation type. ② One way type. Boiling solution passes through the heating surface in the heating chamber without circulating, and the concentrated solution is discharged immediately, such as rising film, falling film, stirring film, and centrifugal film. ③ Direct contact type. Heating medium and solution directly contact for heat transfer, such as immersion combustion evaporator. During the operation of the evaporation device, a large amount of heating steam is consumed. To save heating steam, multi effect evaporation devices and steam recompression evaporators can be used. Evaporators are widely used in chemical, light industry and other sectors. The service tenet of 'everything for the customer, everything for the customer' has already penetrated into the hearts of all employees in the company! We implement a three guarantee system and one-stop service! The customer's purchase of the products sold by our company is only the beginning of their interaction with our company. It is the beginning of the after-sales service department's work. Throughout the entire stage of customer use of the products, all of our after-sales service personnel will provide you with thoughtful, meticulous, enthusiastic, and timely service, allowing you to truly experience the convenience and value that our products bring to you.