1Thermocouple signal isolator：

The YSD-P type thermocouple signal isolator is used to isolate and convert temperature signals from thermocouples (K, S, B, T, E, J, N, R) into standard analog signals or relay contact signals within the temperature ranges of 0-130 ℃, 0-800 ℃, 0-1100 ℃, 0-1600 ℃, and 0-2000 ℃. It can be directly connected to a display meter, PLC, or computer system.Thermocouple signal isolatorWidely used in automatic cargo systems in the mechanical, electrical, railway, petrochemical, metallurgical, chemical, food, and wastewater treatment industries.

Shanghai Yadu Thermocouple Signal Isolator

IIThermocouple signal isolatorcharacteristic:

1. Measurement:Thermocouple (K, S, B, T, E, J, N, R) type

2. Purpose: To heat upElectric couple (K, S, B, T, E, J, N, R) typeThe signal, as well as the encoder or proximity optocoupler switch signal, can be isolated and converted into standard analog signal output or relay contact signal output, which can be directly connected to a digital display meter, PLC, and computer system.

3. Working principle: Optocoupler linearly isolates signal to adjust output.

4. Accuracy: ± 0.2% RO

5. Output: Standard analog signals or relay contact signals such as 0~20mAdc, 4~20mAdc, 0~10Vdc, 0~5VDC, -10~0~10Vdc, etc.

IIIThermocouple signal isolatorTechnical parameters:

1. Measurement:Thermocouple (K, S, B, T, E, J, N, R) type

2. Main features: Super strong anti electromagnetic interference ability

3. Response time:<400msec

4. Output current: 4-20mAdc, 0-20mAdc, 0-10mAdc, special signal

5. Output voltage: 0-10VDC, 1-5VDC, 0-5VDC, special signal

6. Output load: current output<750 Ω, voltage output>1000 Ω

7. Accuracy: ≤± 0.1% R0

8. Power consumption: DC power supply<3W, AC power supply<4VA

9. Shell material: ABS

10. Isolation: Input, output, power supply, and casing are isolated from each other

11. Insulation impedance:>100 Ω, DC500V

12. Working environment temperature and humidity: -10~60 ℃/less than 95% relative humidity (non condensing state)

13. Dimensions: 112 (L) × 65 (W) × 70 (H) mm

14. Installation method: 35mm standard guide rail

15. Weight approximately 200 grams

IIIThermocouple signal isolatorSelection diagram: