DRX-I-PB (PC) Thermal Conductivity Tester (Thermal Protection Plate Method)Main technical parameters:

(1) Thermal conductivity range: 0.015-2w/m · k

(2) Zui high temperature: Hot plate: 80 ℃ with heated constant temperature water bath; Cold plate: A constant temperature water bath with refrigeration can cool below room temperature.

DRX-I-PC type: Hot plate: less than 300 ℃ with heater control, cold plate: can be cooled with a constant temperature water bath below room temperature. Low temperature to -20 ℃ with Zui

DRX-I-PB (PC) Thermal Conductivity Tester (Thermal Protection Plate Method)Can be equipped with dual specimen and single specimen testing devices

(3) The instrument realizes digital temperature measurement with an accuracy better than 0.2 level.

（4）. Measurement results with an accuracy of ± 3%;

（5）. The measured heating power is 35W ± 1%.

(6) Sample size requirements: 200 × 200 × (5-20) (mm) or 300 * 300 * (5-50) mm available for selection

(7) According to the testing requirements of different users for materials, thermal resistance testing method, heat flux meter and testing instrument can be equipped