The function of the thermal conductive silicone rolling machine is to apply and roll liquid silicone and foamed silicone.
The equipment has the characteristics of simple operation, controllable thickness, stable accuracy, convenient maintenance, and exquisite appearance. Customers can choose different processes based on the viscosity of the product to complete the coating and rolling of the product.
The functions of the rolling machine include the first unwinding function, the second coating rolling function, the third material blocking function, the fourth distance adjustment function, and the fifth transmission function
Dynamic function, sixth roller gap display function.
Unwinding function: Unwinding mainly serves as the position for unwinding the substrate, with 2 upper unwinding rolls and 2 lower unwinding rolls, depending on the thickness of the product
The relative position of the same substrate may change.
Coating and rolling function: Control the thickness of foam silicone and thermal conductive silicone. The thickness is determined by the adhesive strength of the material
Material blocking function: Control the width of the product
Distance adjustment function: Adjust the gap between the two rollers
Transmission function: the working power source of the entire equipment
Oven functions: conveying function, observation display window, hot air circulation function, exhaust valve, maintenance safety function, protective net function
The characteristic products of the oven are easy to observe, the equipment operation is simple and easy, the heating tube maintenance is convenient and fast, and the appearance is exquisite and beautiful
The replacement method of the heating tube: First, push out the angle iron on both sides of the protection. Second, remove the protective net in sequence. Third, loosen the nut on the head of the heating tube and replace it with a new one.
The conveying function is the power source of the tunnel furnace to transport products
Observe the surface vulcanization characteristics of the product through the display window
Hot air circulation function: make the temperature of each section of the oven uniform and consistent
The exhaust valve is the channel through which smoke flows after vulcanization of the product
The protective net function prevents burns from the heating tube during deep inspection of the product
Cooling platform cools and dissipates heat from the surface of the product
The slicer has five main functions, namely, laminating and unwinding, peeling and winding, product trimming, product sliding cutting, and fixed length winding. The peeling and rolling function peels off the substrate on the surface of the product (if it is foam silicone, it needs to be peeled up and down), and the trimming function trims the edges of the product
Sliding cutting function for horizontal fixed length cutting of products
Rolling function for fixed length winding of products. Rolling function for fixed length winding of products