characteristic

-Corrosion resistant shell made of recyclable polymer polyethylene material
-The nozzle of spray tube is made of plexiglass, which is more conducive to the average distribution of salt spray
-Sturdy structure
-A good insulation layer ensures the service life of the materials used
-Humanized placement of experimental samples
-The external heating of the test chamber uses a safe voltage of 42V
-Lightweight test box top cover, with an opening radius of up to 75 °, and test items can also be placed into the test space using a crane
-The top cover is sealed with fluid static pressure
-Ergonomic touch screens and display instruments
-Operate, program, and set parameters of the test chamber through a color touch screen
-Digitally display set values and actual values
-Digitally display the water level status on the operation panel
-The salt water tank with a capacity of 180l ensures the long-term operation of the test chamber
-The diameter of the filling hole of the salt water tank is 125mm, located at the front of the test chamber, which can easily fill salt water
-Plug and play design, modular structure, no need for on-site installation and debugging
-The design of the test chamber is easy to maintain, and opening the lightweight and detachable top cover of the test chamber allows for easy replacement of all components

application

Standard configuration

-Digital Measurement and Control System Simpac*
-Ergonomic 8 "TFT color touch screen
-Ethernet interface (100/10M) is used to access the network
-USB interface, can directly use USB flash memory to record measurement data
-High precision two fluid nozzle is used for spray pipe
-Compressed air controller
-Compressed air atomizing humidifier with water control
-Saltwater flow meter and dosage device
-Salt bucket, 180l
-Sample rack
-The robust and corrosion-resistant sample support frame ensures that the test sample and platform are at the same height
-Grid structure base plate
-The extended U-shaped slot located on the right-hand side is used for measuring and power lines
-Salt spray test calibration (test space temperature+35 ° C/humidifier temperature+49 ° C)
-Calibration of condensate water test (test space temperature+40 ° C)
-Ventilation equipment that complies with DIN50 014 Article 5 for ambient temperature
-Automatic water tank is used to meet DIN EN ISO 6270-2 [DIN 50 017 KFW]/EN ISO 6988 [DIN 50 018]
-The bottom drainage pipe of the test chamber is equipped with a diaphragm valve to meet DIN EN ISO 6270-2 [DIN 50 017 KFW]/EN ISO 6988 [DIN 50 018]