High rigidity, high stability, high precision, and heavy-duty cutting resistance
Vertical milling head is NST40# Powerful structural turret head.

The spindle adopts integrated molding SCM-21 The material is tempered, carburized, precision ground, and treated with precision P4 Grade bearings.

The internal grinding of gears, clutches, and bearings in the vertical milling head adopts a forced circulation lubrication system to reduce noise and ensure the service life of each component.

The vertical milling head can rotate 45 degrees left and right, using a twin-screw with a clamping ring to lock the head seat, lock, relax, quickly, and accurately.

Casting adopts FC-30 and FCD-45 Made of advanced and strong cast iron, combined with internal super strong reinforcement, and subjected to forced tempering treatment to eliminate stress, ensure strength, and eliminate deformation concerns.

Workbench by FC-30 Made of advanced and strong cast iron, the workbench and slide rail are quenched and tempered, then subjected to high-frequency hardening treatment and grinding. T After accurate machining of the groove, the three grooves and six surfaces are precisely ground, with a full stroke tolerance of 0.01 m/m Internally, making the workpiece processing operation fast and accurate.

X,Y Two axis adoption C5 Pre pressed double nuts, precision ball screws, and attached locking devices ensure smooth transportation, small backlash, and excellent positioning.

X Axis feed adopts 1000 W of AC Servo motor and original driver, combined with electromagnetic clutch for safe, powerful, fast, stable, and low-noise driving. Automatic escort 0-1500 mm/min Fast escort up to 3500 mm/min。

Y Axis and reserved servo drive space, can be added at any time (special accessories).

X,Y Axis slide, dovetail and adjustment hook, fully attached Turcite-B Wear resistant sheet, then precision manually chipped, with long-lasting precision and wear resistance.

X,Y,Z The three-axis slides are each equipped with precision scraping blades for protection, ensuring that the slides are not scratched.

X,Y,Z The three-axis slides and screws, gears, and bearings are equipped with digital display oil injection machines with timing control devices. The oil supply time and interval time can be adjusted in a two-stage manner, and are matched with a volumetric oil separation seat to ensure sufficient and uniform oil supply to each part.