Processing aperture range: the processing aperture range of any series
1. Simple NC control, user-friendly operation
2. Automatic touch protection
3. Easy to program, with a range of up to 2000 lines
4. The starting address of the program can be freely set
5. Use the selected transmission software to transfer program code between PC and machine
6. After the electrode is used up, it automatically rises to the user's preset address
7. Four major processing parameter databases, selected based on material and electrode size


1. Whether it is heat-treated steel, superhard alloys, or powder metallurgy, any conductive metal can be subjected to fine hole discharge machining
2. Heat treated steel or tungsten steel, without the need for perforation, can be directly discharged for tapping
3. Software version Ver.26 has added a soft start function to prevent burrs at the entrance when high current is applied
4. The old version can be updated to the new version in the future
5. Suitable for threading hole processing of wire cutting molds
6. The machining aperture ranges from 0.1mm to 3.0mm (standard), and 3.1mm to 6.0mm can be selected
7. For electrodes with a processing depth of 0.5mm or more (electrode diameter), the ratio can reach (200:1)
8. Curved, spherical, or irregular surfaces can all be processed
9. High speed and low electrode consumption, suitable for both red and yellow copper pipes
Heat treatment SKD-11 for processing, using a 1mm red copper electrode with an electrode consumption rate of 30-60%
10. The processed holes have good roundness and perpendicularity, and the surface is free of burrs
11. Using purified water as a processing fluid is easy to obtain and cost-effective
12. Servo motor control with high-speed response speed, stable processing and fast speed
13. Reliable discharge circuit that can stably process even small electrodes
14. Discharge of tungsten steel without chamfering effectively improves the service life of the mold and the processing procedure for surface re grinding, and effectively reduces the aperture after processing
EX.CD650, 76mm thick, using 0.5mm electrode for processing, processing time of 15 minutes, processing aperture of 0.57-0.58mm (optional)
15. HCD power supply (optional), adding HCD power supply can double the processing efficiency. (Compared to Jiasheng Standard SD Series)
16. Simple NC control, easy to operate and user-friendly
17. Automatic touch protection, the machine immediately stops when the electrode touches the pressure plate
18. Easy to write program, with a maximum editing range of 2000 lines
19. Function to customize the starting position of any program
20. Program transfer between PC and NC controller through PNC-RS232 software (optional)
21. After the electrode is used up, it automatically rises to the electrode position set by the user
22. Four major discharge parameter databases, storing parameters according to workpiece material and electrode size, easy to use and call
23. Coordinate display, depth control, program display, and EDM discharge parameter storage and calling
24. Standard equipped with precision reference parallel pads, easy to set up the workpiece and reference points
25. Customers can use easily obtainable industrial distilled water with peace of mind