The main features of the "Tianzhuo" brand TZ-200 plasma cutting machine are:(Maximum cutting thickness of 80mm)

1Input voltage: three-phase 380V; frequency: 50/60Hz; temporary load rate: 100%;

2Equipment weight:82kg, Dimensions: length, width, and height (890 * 430 * 900), color: red;

3Input current:71A. Rated input capacity 46.7KVA

4Rated output current: 200A;

5Cooling method for cutting gun: air cooling combined with circulating water cooling inside the cutting gun;

6Cutting thickness range: Maximum cutting thickness for carbon steel, cast iron, stainless steel: 65 mm，

7Power supply form: electronic inverter technology;

8The equipment has protection and indication functions such as overheating, insufficient air pressure, and insufficient water pressure;

9The cutting torch comes in two types: straight handle and curved handle, making it easy for users to switch between manual and semi-automatic cutting! Water cooled type! (Please specify which type of cutting gun is needed when placing an order)

10Non contact cutting ensures that the nozzle is not damaged and the success rate of arc initiation is 100%; Simultaneously possessing excellent arc maintenance function;

11. IGBTReverse breakdown voltage of 3000V, with a good current suppression coil to prevent the backflow of arc voltage

12． 20Raise the cooling water tank to ensure the cooling effect of the cutting gun and extend the service life of the cutting gun and consumables;

13． The electrode nozzle adopts hafnium wire imported from the United States, processed by CNC lathe, with concentrated arc energy, small cutting gap, and good verticality! Imported products produced by our companyPlasma cutting machine accessoriesFor the same type of hafnium wire!

Other performance:

1．The equipment can automatically cut off the power supply of the control part of the equipment in case of insufficient air pressure, ensuring that the pressure for normal use of the equipment is 0.35-0.5Mpa.

2．The control board has the functions of early air supply and delayed air shut-off, ensuring that the cutting gun accessories can receive sufficient cooling!

3．The front panel of the equipment is equipped with a gas detection switch, which can timely check whether the gas pressure of the equipment can meet the cutting needs and avoid affecting the performance of the equipment due to insufficient air pressure.

4．It can be paired with semi-automatic small cars or small CNC cutting machines for semi-automatic or fully automatic CNC cutting.

5．The standard length of the cutting gun cable is 7 meters, which can be extended according to requirements (additional cost)!

6．The electrode cooling method is all-round water cooling, with long electrode life and low nozzle consumption!

Main technical parameters of the equipment: