1、 Technical parameters:

1. Display method: High contrast segmented LCD display, high brightness EL backlight;

2. Measurement range: 0.75mm -300mm (steel, depending on the probe);

3. Speed range: 1000-99999m/s;

4. Resolution: 0.1mm/0.01mm optional;

5. Display value accuracy: ± (0.5% H+0.05) mm, where H is the actual thickness of the measured object;

6. Measurement cycle: 4 times per second for single point measurement and 10 times per second for scanning mode;

7. Storage capacity: can store 20 sets (up to 100 measurement values per set) of thickness measurement data;

8. Working mode: It has two thickness measurement modes: single point thickness measurement and scanning thickness measurement;

9. Unit system: metric or imperial, metric and imperial can be freely converted;

10. Power supply voltage: 3V (2 AA alkaline batteries);

11. Continuous working time: greater than 100 hours (when backlight is not turned on);

12. Communication interface: RS232， Can be connected to micro printers or PCs;

13. Dimensions: 150mm * 73.5mm * 31mm;

14. Weight of the whole machine: 185g (excluding battery).

2、 Configuration List:

1. 1 host;

2. 1 standard probe;

3. 1 bottle of coupling agent;

4. 1 aluminum alloy instrument box;

5. 1 copy of operation manual, certificate of conformity, and warranty card;

6. Two AA alkaline batteries.

3、 Optional:

1. Coarse crystal probe;

3. Small diameter pipe probe;

4. High temperature probe.

5. 1 micro printer;

6. Print 1 cable;

7. 1 set of data management software;

8. One communication cable.

●It can be applied to measure the thickness of hard materials, such as metal materials such as steel, stainless steel, aluminum, copper, chromium alloys, as well as non-metallic materials such as plastics, rubber, ceramics, and glass.

●Monitor various pipelines and pressure vessels in production equipment to detect their degree of thinning after corrosion during use.

●This instrument is widely used in various fields such as petroleum, chemical, power, boiler, metallurgy, shipbuilding, aviation, aerospace, etc.

Technical Support 1： 0592-3195306 /
Contact: Manager Lian

Technical Support 2： 0592-3195308 /

Contact: Manager Peng

Product Selection Guide - Click to Download:Xiamen Tianyan Instrument Ultrasonic Thickness GaugeProduct Selection Guide

Comparison of Main Parameters of Xiamen Tianyan Instrument Ultrasonic Thickness Gauge

Explanation of individual parameters

1、 Resolution

TY100All other instruments can accurately test to two decimal places to meet the latest standard accuracy.

2、 Coupling status prompt

The coupling state refers to the state of intact contact with the material, and the better the coupling state with the material, the more accurate the test data will be.M5-C3、TY500、TY300The instruments can accurately display the degree of coupling, ensuring the accuracy of the test data.

3、 Penetrating coating

M5-C3Maximum penetration can be achieved by replacing different probes20mmAccurately measure the thickness of the coating without the need for zero calibration. This is alsoM5-C3The biggest difference compared to other thickness gauges in China.

4、 Diverse Display

M5-C3haveBScanning mode, which can display the cross-section of the tested material, is commonly used to show the contour of the bottom surface of the tested material, in order to determine whether the thickness of the tested material is reliable. Also includedAScanning mode, can directly display ultrasound wavesAThe type signal can be displayed through graphical signals to determine whether the test results are reliable and accurate.

5、 Data processing

M5-C3Can be accessed through built-inSDCards can store a large amount of data and can be used forUSBConnect the data interface to the computer for data transmission. It can also automatically update the operating program by connecting to a computer.TY200Can be stored internally1000Group data can also be connected to a computer for data transmission and organization through optional functions.

6、 Product size

All models can be worn on the wrist for work,TY500The size is116mm*63.5mm*31mm，TY100/200/300The size is150mm*73.5mm*31mmAnd wrist type ultrasonic thickness gaugeTY390The size is only97mm*63mm*27mmTherefore, it is more suitable to wear it on the wrist for simple testing.

7、 Test probe

In order to meet the testing requirements of customers, we have prepared various corresponding probes based on the size and type of the tested material. Please consult the regional managers for details.