The TX-DBS50 series immersion level transmitter is based on the principle that the measured liquid static pressure is proportional to the height of the liquid. It uses the piezoresistive effect of diffused silicon or ceramic sensitive elements to convert static pressure into electrical signals. After temperature compensation and linear correction. Convert to 4-20mADC standard current signal output.
The sensor part of the TX-DBS50 series immersion type liquid level transmitter can be directly immersed in the liquid, and the transmitter part can be fixed with flanges or brackets, making installation and use extremely convenient.
1、 Characteristics of TX-DBS50 series input type liquid level transmitter
1. Good stability and high accuracy
2. The immersion type liquid level transmitter is directly inserted into the measured medium, making installation and use quite convenient.
3. Solid state structure, no movable parts, high reliability, long service life. High precision measurement can be carried out from water and oil to viscous paste, without being affected by the foaming, deposition, and electrical characteristics of the measured medium. Wide range temperature compensation. The input type liquid level transmitter has power reverse polarity protection and overload current limiting protection.

2、 Main technical specifications of TX-DBS50 series input type liquid level transmitter
1. Measurement range: 0.3-100m (optional by the user)
2. Accuracy: 0.2, 0.5, 1.0 levels
3. Working temperature: -20~80 ℃
4. Output signal: 2-wire 4-20mADC
5. Power supply voltage: standard 24VDC (12-36VDC)
6. Non sensitive area: ≤± 1.0% FS
7. Load capacity: 0-600 Ω
7. Relative temperature: ≤ 85%
8. Protection level: IP68
9. Explosion proof mark: Exia Ⅱ CT4-6

3、 TX-DBS50 Series Input Liquid Level Transmitter Selection Table