TTL square wave signal grating ruler GVS600T high-performance CNC grating ruler

Product Introduction

Optical glass measuring substrate grating ruler (grating pitch of 20 microns), especially suitable for CNC machine tools.
Resolution up to 0.01 micrometers (0.000001 millimeters), accuracy level up to ± 1 micrometer (0.001 millimeters).
The innovative device inside the ruler can effectively block the inflow of liquid due to improper filtration.
The output connection cable can be adjusted in direction.
The connector is integrated into the sensor.
The reference index can encode distance or step distance at preset or optional positions.
Small size, allowing for installation in narrow spaces

Mechanical and electrical characteristics

1. The measuring body is solid and heavy, made of electroplated aluminum material, with dimensions of 40x24 millimeters.
2. The elastic coupling can perform error compensation, mechanical hysteresis self correction, and clearance error<0.2 micrometers (0.0002 millimeters)
3. The sealing lip fixed along the sliding surface of the reading head on both sides of the port has non extensibility.
4. The reading head, including the connecting rod and reading block, is fully and effectively protected by the electronic board.
5. The reading module slides along the ball bearing.
6. Die cast pull rod, nickel surface treatment.
7. The glass grille is completely placed inside the ruler cover.
8. Rubber gaskets can provide complete protection for mechanical joints (if disassembled)
9. It can be completely disassembled and reassembled.
10. Direct service is available.
GVS600T electrical characteristics:
1. A reading device with an infrared emitter and a receiving photodiode.
2. A and B output signals with a phase shift of 90 ° (electrical).
3. The reference index can encode distance in a constant step or selectable manner.

4. Cable:

8-wire shielded cable=6.1 mm, polyurethane outer sheath
Conductor section: power supply 0.35 square millimeters; Signal 0.14 square millimeters
The bending radius of this cable shall not be less than 80 millimeters.
This cable can be used for continuous operation.

TTL Square Wave GVS600TParameter specification table:

TTL square wave signal grating ruler GVS600T external dimensions table:

GIVI is famous for producing high-precision grating rulers, magnetic grating rulers, and encoders.
Grating rulers are divided into incremental grating rulers (SCR3923, NCS, GVS200, ISA2320, GMS) and absolute grating rulers (AGS and GVS204)
The magnetic grid ruler is divided into incremental magnetic grids (MTS H, MTS M, MTS P, MTS I, MTS V, MTR, GVS215) and absolute magnetic grids (AGM and GVS219)
Encoders are divided into incremental encoders (EN58, EN38, EN413, VN413) and absolute encoders AEN58