TPU | TPE | TPR | TPV | PU elastomer crusher

Gu'an anti adhesive material crusher:

This series can crush: TPU, TPE, TPR, TPV, PU. Elastic plastic crusher, silicone, elastomers (TPU, TPR, TPE, TPO, TPB, TPI, TPF, PU, SBS, SIS, SEBS, SEPS), EVA (foam), etc.

This series of elastomer crushers is specifically designed and manufactured for TPE, TPR, TPU, PU, EVA, pure PP, raw rubber, hot-melt elastomers, and a range of plastic and rubber materials that are not resistant to high temperatures

TPU | TPE | TPR | TPV | PU elastomer crusher

Its main feature is to crush the material into pellets in a low temperature environment of 5-20 degrees Celsius

The application of elastic materials in production and daily life is becoming increasingly widespread, due to their stability, temperature resistance, and sealing effect that ordinary plastics cannot provide. However, the cost of elastic materials is relatively much higher than that of ordinary plastics

Most hot melt materials are elastomers and rubber materials The problems they encounter during crushing are:

1. Elastic materials have low hardness and soft physical properties, and cannot be crushed by impact or compression like brittle materials such as ABS

2. Hot melt materials have poor temperature resistance. Most materials will exhibit a molten state in environments above 70 degrees Celsius, and some materials (such as high-purity PP) may even begin to melt and adhere to each other at around 30 degrees Celsius

3. After high-frequency friction, most elastomers generate static electricity, which causes the material to be crushed into particles and the material to be discharged smoothly

TPU | TPE | TPR | TPV | PU elastomer crusher

Based on the above characteristics of thermosensitive materials, the low-temperature crusher has been designed and improved to achieve the following functions:

1. Two different types of steel materials are used for cutting tools: high hardness high-speed steel is used for the cutting edge, which greatly improves the cutting and crushing ability of the cutting edge (with higher hardness than SKD-11 material)

Complete the cutting in one go without any edge banding At the same time as high cutting, it eliminates multiple cutting and friction caused by inadequate cutting in one go

2. The blade body is made of steel with low hardness, which enhances its toughness and greatly improves the impact resistance of the tool, ensuring the crushing force of large materials

3. The crushing chamber adopts a low-temperature design, allowing materials to be crushed in a low temperature environment of 5-20 degrees Celsius, avoiding adhesion caused by material melting due to temperature rise

The sieve is specially treated to reduce the impact of static electricity on material falling and ensure smooth discharge