detailed description:This machine is developed according to the technical requirements specified in the standard for spring tension compression testing machines. Mainly used to test the mechanical properties and indicators of various spiral springs;Adopting CNC motor loading and control, it can achieve dual speed preset. Implemented high-speed approximation and slow data acquisition, improved testing accuracy, and ensured testing efficiency;Designing with imported advanced large-scale circuits is controlled by computers. LED display, intuitive and clear human-machine dialogue;The use of an electronic handwheel allows for manual calibration;There are F-P, H-P, P-H and other modes for automatic testing, which can set the return height and automatically return after the test is completed. Equipped with 5-point testing, it can test printing stiffness, initial tension, etc;Equipped with upper computer communication interface (RS232);By using CNC motors for dragging and ball screws for loading, efficient and high-precision testing of spiral springs can be achieved.

Related parameters Model name: TLS-S series fully automatic spring testing machine Main technical parameters: Testing machine level: Level 0.5, Level 1; Maximum experimental force (N): 100N, 200N, 500N, 1000N, 2000N; Minimum reading value of test force (N): 0.02% of full range for each level; Minimum displacement reading value (MM): 0.01; Loading speed: 0.05-500.00mm/min, any preset; Maximum distance between two pressure plates in tensile test (mm): 350mm; Maximum distance between two pressure plates in compression test (mm): 350mm; Maximum stroke for stretching and compression experiments (mm): 350mm; Diameter of upper and lower plates (mm): Ø 110mm; Power supply voltage: 220V ± 10% 50Hz Note: