Features:
The dehumidification and drying feeding combination integrates three functions: dehumidification, drying, and dry dehumidification feeding. It is equipped with a honeycomb wheel to obtain stable low dew point dry air. The design is divided into two types: semi open and fully enclosed;
The feeding system is equipped with a cut-off valve to ensure that there is no residual raw material in the material pipe. The machine is equipped with a microcomputer control and is a standard optical grade model with an electric eye dust removal vacuum hopper, which can remove fine particles from the raw material;
Micropowder can avoid the generation of stains in the molding of optical grade products. All contact surfaces of optical grade models are polished with stainless steel mirror finish and equipped with a closed-loop feeding system to prevent contamination or moisture regain of the raw materials.
The dehumidification drying material bucket adopts a lower air duct design, combined with a cyclone exhaust device, to prevent heat loss, ensure temperature, and improve drying efficiency;
This series of dehumidification systems adopts a dual cooling structure to ensure lower return air temperature and dew point;
PLC control and LCD touch human-machine interface can be selected for centralized and convenient operation, which can control the automatic operation of the whole machine. Dew point meter can be optionally equipped to monitor dew point at any time;
Optional high-performance filtration and optical grade storage tanks are available to ensure that raw materials are not contaminated by external air. Three injection molding machines can also be used for raw material supply.