FSM-6000LEThe glass surface stress meter is used to measure the surface stress of chemically and physically strengthened glass. By propagating light along the surface of glass, the surface stress and stress layer depth are measured using photoelastic technology. This machine is equipped with a computer, which can reduce the measurement error of the measurer and facilitate the management of measurement data.

1.There is a unique measurement method (principle of refractometer photoelastic analysis) that other models do not have.

2.Automatic measurement with minimal personal error caused by the tester.

3.Being able to save data on a computer facilitates quality management.

4.Samples with poor testing conditions can be manually measured.

5.Using LED light source, with a long service life of up to 10000 hours (previously 500 hours).

6.By using glass calibration plates, machine errors can be minimized.

7. Capable of automatically saving data on a computer for quality management purposes

8. Realize continuous measurement while automatically determining whether it is qualified/unqualified based on the set interval.

9During continuous measurement, the system automatically saves the measured data and accumulates the number of measurements (qualified/unqualified).

10In addition to continuous measurement, you can also freely choose measurement methods such as single measurement or manual measurement.

11Implement software controlled automatic drip function (saving liquid waste caused by manual operation) (additional optional function for payment).

12Realize continuous measurement while automatically determining qualified/unqualified according to the set interval

13The instrument automatically measures without the need for manual clicking

14You can set the sound prompt and image color function by yourself

15You can set the parameters for good/bad samples and other stages by yourself

16Continuous automatic measurement "speed is about 0.3S/piece, which is 3-5 times faster than the old model in terms of testing speed

17Automatic monitoring function: When samples are placed, the software automatically performs testing

18In the absence of sample placement, the software will prompt "No sample detected"“

19Basic measurement settings and system parameter settings with password protection