Supply KM950 handheld flue gas analyzer and power plant specific flue gas analyzer-Global supplier

One Introduction to KM950 Smoke Analyzer:
1. Suitable for boiler combustion testing and pollution emission monitoring
2. Handheld, fully Chinese display, easy to operate, convenient for on-site use
3. It can measure O2, SO2, NO, NO2, CO, flue gas temperature, ambient temperature, flue gas pressure, total efficiency
4. Automatically calculate flue gas flow rate CO2、NOx、 Net efficiency, total loss, net loss, excess air coefficient
5. Built in dual head powerful vacuum pump ensures normal operation under high negative pressure and fast response time
6. Flexible combination of CO, SO2, NO, NO2 sensors, easy to upgrade
7. The results show that the conversion between percentage concentration, ppm, and mg/m3 is arbitrary
8. Measurement alarm limits for different gas components can be set separately
9. The internal special gas path design minimizes the loss of SO2 and NOx during testing to the greatest extent possible
10. Automatically correct sensor cross interference based on smoke status
11. Large screen display and backlight function facilitate normal use of the instrument in dim conditions
12. Directly display the flow rate of flue gas through pressure measurement
13. After booting up, you can directly enter the testing interface without pressing any keys, which is simple and convenient
14. Dual use of AC and DC, capable of continuous operation for 6 hours on a full charge
15. Data storage function
16. Infrared remote control printing method
17. Built in automatic calibration program facilitates users to calibrate themselves
18. Users can customize the printing content

II Technical Specifications:

measure quantity	project	resolution	precision	scope
measure quantity	O2 CO SO2 NO NO2 flue gas temperature ambient temperature pressure	0.1％ 1ppm 1ppm 1ppm 1ppm 0.1℃ 0.1℃ 0.01mbar	-0.1％－＋0.2％ ±20ppm<100ppm,±5％>100ppm ±5ppm<100ppm, ±5％>100ppm ±5ppm<100ppm, ±5％>100ppm ±5ppm<100ppm, ±5％>100ppm 1 ℃± 0.3% reading 1 ℃± 0.3% reading ±0.5％	0—25％ 0—10000ppm 0—5000ppm 0—5000ppm 0—1000ppm 0—1200℃ >Using a high-temperature probe at 600 ℃ 0—50℃ 0_;150mbar
self move plan calculate	CO2 NOX Net temperature efficiency Void coefficient loss CO/CO2	0.1％ 1ppm 0.1℃ 0.1％ 0.1％ 0.1％ 0.0001	±0.3％ ±5ppm<100ppm,±5％>100ppm ± 1 ℃ ± 3% reading ± 1.0% reading ±0.2％ ±0.2％ ±0.01	0- Fuel analysis value 0—6000ppm 0—1100℃ 0—100％ 0—2885.0％ 0—99.0％ 0—0.9999
configuration	Standard configuration: Host, 350mm long probe, dust and water filter, charger, portable bag, operation manual Optional: Infrared printer, 1-meter probe (with built-in PTFE tube) Note: Except for O2 (which is a mandatory test item), users can choose 1-3 sensors from SO2, NO, NO2, and CO according to their needs. The measurement range can also be selected, but it is not possible to select the same sensor for two concentrations at the same time.

Chengdu Haipai Environmental Protection Technology Co., LtdThe company provides you with comprehensive technical support and perfect after-sales service! Details consultation: