Brand:Vic Environmental Protection

Model:complete

　Specifications:customizable

　Length:500(mm)

　Diameter:200(mm)

Service area:1000㎡

Introduction to submersible jet aerator

The submersible thruster aerator is a portable multifunctional oxygenation system. When the impeller of this device rotates at high speed, it generates strong axial thrust and radial stirring force, which can crush the inhaled air into small bubbles and blow them into the bottom, thus achieving dual functions of aeration, thrust, and mixing, greatly improving oxygen utilization efficiency.

Advantages of submersible jet aerator

　1. Stable and reliable all copper motor:Motor winding overheat protection function, with a normal service life of more than 10 years, high temperature resistance, durability, and precise winding.

2. Precision rotor of aerator:Stable and reliable power, long service life, no noise, suitable for high-speed operation of stainless steel bearings.

3. Exquisite sealing ring:Good oxygen resistance and aging resistance, wear-resistant and durable.

4. Jinggong Bearing:High end ball bearings run smoothly with low noise and long service life under high loads.

Selection tips for submersible jet aerators

　1. Lift:It is the height at which the water pump can vertically pump, but when the total height is reached, the water pump flow rate is 0. Under normal circumstances, it is better to use an actual head within 60% of the marked head.

2. Traffic:When the head is 0, the actual pumping amount should be lower than the marked flow value. Generally, the actual flow rate used is about 60% of the labeled flow rate, so it is better to buy a large water pump than a small one.

　3. Rotor:When the flow rate of your water pump decreases or does not work, please first turn on the pump to remove the rotor inside, rinse it with clean water, and then reinstall it. Pay special attention to the ceramic shaft when disassembling and washing, and do not break it.