Kaifeng Sida starch drying equipment is specifically designed for drying starch such as sweet potato starch, potato starch, cassava starch, kudzu root starch, wheat starch, etc
Starch drying equipment - airflow collision dryer, also known as instant or flash dryer, provides airflow drying equipment for industries such as pharmaceuticals, chemicals, and food.

Starch dryer is an energy-saving drying equipment that uses airflow collision vortex flash evaporation dryer. Cold air passes through the hot air stove and becomes dry hot air. It mixes with dispersed materials in the equipment to form a suspended state, allowing the gas and solid phases to flow forward at a high relative velocity while vaporizing moisture, achieving the purpose of material drying.
Overview of starch drying equipment:

　　
Starch drying equipment

1. High drying intensity, low equipment investment, large evaporation capacity, can range from 250kgH2O/h to 3000kgH2O/h;

2. Short drying time, suitable for thermosensitive materials, finished products do not come into contact with the outside world, no pollution, good quality:

3. The equipment is provided as a complete set, and the heat source can be selected from steam heating or matched with coal-fired, oil fired, gas-fired hot air stoves, etc.
Characteristics of starch drying equipment:

1. High drying intensity and low equipment investment: The processing capacity of airflow drying equipment is large, with a water evaporation capacity ranging from 50kg/h to 2000kg/h, while the equipment has a small capacity and low investment.

2. High degree of automation and good product quality: The airflow drying process is entirely carried out in pipelines, with a short drying time (only 0.5-2 seconds). Therefore, automation can be achieved, and the product does not come into contact with the outside world, resulting in minimal pollution and good quality.

3. Complete equipment supply and free selection of heat source: The basic model consists of an air filter, heater, feeder, drying pipe, fan, and cyclone separator. Users can purchase dust collectors or other auxiliary equipment as needed.

4. In terms of heating method selection, airflow drying equipment has great adaptability. Users can choose steam, electricity, thermal oil, or hot air stove heating according to the conditions in their region. At the same time, they can also choose according to the material's heat-resistant temperature (or hot air temperature): when ≤ 150 ℃, steam heating can be used. When ≤ 200 ℃, electric heating (or steam heating, electric compensation, or thermal oil heating) can be used; When the temperature is ≤ 300 ℃, coal-fired hot blast stove; When the temperature is ≤ 600 ℃. Oil fired hot blast stove. Short drying time, suitable for heat sensitive materials, the finished product does not come into contact with the outside world, is pollution-free, and has good quality;

5. The equipment is provided as a complete set, and the heat source can be selected from steam heating or matched with coal-fired, oil fired, gas-fired hot air stoves, etc.

6. Basic airflow drying equipment, suitable for materials that are loose, have low viscosity, and are finished as particles or powders. This process is illustrated as positive and negative pressure airflow drying, and users can choose the positive pressure drying method according to the product.