Introduction to Standard Horizontal Sewage Pumping Station

The standard horizontal sewage pump station is mainly used for collecting and transporting shallow buried sewage on the surface, and is mostly used in the fields of septic tanks, alternative sewage regulating tanks, and rainwater collection tanks,Simultaneously applied to municipal engineering, industry, or any other building that cannot directly discharge wastewater into the sewage treatment system by gravity. Among them, municipal drainage is applicable to intermediate pumping stations such as sewage pumping stations, drainage pumping stations, and confluence pumping stations.

The standard horizontal sewage pump station has a small excavation volume, low cost, and simple construction; The pump station has a large effective volume and low equipment cost; There is a greater advantage when the groundwater level is shallow.

Standard horizontal sewage pump stationPerformance and advantages

>Customize according to demand

The main structure of the integrated prefabricated pump station is made of fiberglass reinforced plastic (GRP) or higher quality materials, which are sturdy, durable and long-lasting. As an integrated unit transportation, the pump station includes submersible sewage pumps, pipelines, valves, control system electrical equipment, and maintenance facility platforms.

>Meet the requirements of cost savings

Compared with traditional concrete pump stations, it can save 25% to 30% of the total construction cost. Simplifying the design and construction processes can save approximately two weeks of construction time. The pump station is 100% leak free, pollution-free to the environment, and saves operating costs.

>High quality components

The cylinder is sturdy, and the strength requirement for fiber wrapped fiberglass is twice or more that of traditional laminated fiberglass. It can fully resist corrosion, tearing, and other destructive forces, and ensure permanent waterproofing.

Standard horizontal sewage pump stationstructure

1. Anti slip roof cover

Made of fiber wrapped fiberglass and equipped with anti-theft safety locks, it has the function of easy opening.

2. Pump station cover

Made of fiberglass, with stainless steel basket grille, ventilation exhaust pipe, and handrail.

3. Fiberglass cylinder body

Continuously wrapped reinforced fiberglass cylinder. Adopting computer-controlled winding process to ensure uniform thickness and meet design requirements. Stable and excellent quality, 99.99% leak proof test is required before leaving the factory to ensure no leakage.

4. Hanging ear

External integrated lifting ears are easy to install.

5. Supporting water pump

The submersible sewage pump equipped with the Kenet brand operates smoothly within the designed load range without vibration or cavitation. All rotating components of the pump (including the motor) undergo dynamic and static balance tests during manufacturing. The operating noise of the pump is below 80dB (A).

The self coupling installation submersible sewage pump is equipped with a water outlet bend, an self coupling base, and stainless steel pipe guide rails and lifting chains that serve as connections during movement and automatic positioning. The water pump can slide freely between the top of the pump pit and the self coupling base through guide rails. The sealing between the water pump and the coupling base is a metal to metal connection and sealed by an auxiliary rubber ring.

6. Pressure pipeline.

Stainless steel pressure pipeline. All pipelines undergo pressure testing before leaving the factory to prevent leakage. Imported pipeline DN400. Configure various flanges according to design requirements.

7. Service Platform

Built in service platform for maintenance and upkeep of valves and water pumps; Customize platforms in different forms, positions, and heights according to requirements.

8. Liquid level sensor

Adopting pressure sensors (standard)/float switches/water level electrodes, matched with dedicated monitoring relays, to achieve automatic control and operation of pump station liquid level.

9. Crushing grid

The crushing grid is placed at the inlet of the fiberglass cylinder of the pump station, and it is a submersible crushing grid that is safe and reliable; Equipped with guide rails for easy maintenance and repair.

10. Outdoor stainless steel control cabinet

It can be done manually or automatically. The following control functions can be achieved:

(1) Daily automatic positioning, realizing unmanned pumping station.

(2) Two in use and one backup, mutually backup, automatic switching, working simultaneously at high water levels, automatic switching in case of faults.