SHJ-6ABSix compartment magnetic stirring water bath potIt is a new product that combines a water bath and a magnetic stirrer, with two functions: water bath heating and magnetic stirring. The temperature of the 6 compartments can be controlled separately. This machine adopts an intelligent temperature controller for temperature control, with intuitive and accurate readings, making it more convenient to use.

SHJ-6ABSix compartment magnetic stirring water bath potMain features:

1. The studio water tank is made of stainless steel material, which has corrosion resistance.

2. Adopting intelligent temperature control, accurate temperature control, LED display microcomputer speed measurement, automatic temperature control.

3. Using electronic technology to improve temperature and speed control accuracy.

4. 6-hole mixing can be controlled separately or synchronized at multiple points; The temperature of the 6 holes can be controlled separately without interfering with each other.

5. The device is easy to operate and safe to use.

6. Using programmable integrated voltage stabilizing and boosting circuit, the speed is stable and not affected by voltage fluctuations.

7. The heater adopts a special molding process, immersion ring heating, and uniform heating. Suitable for experiments at different temperatures and speeds.

SHJ-6AB product parameters:

1. Speed: Start at -2400r/min (speed error ± 2 revolutions, constant speedometer)

2. Motor power: 25W * 6

3. Timing range: 0-9999min

4. Temperature range: RT-100 ℃ (300 ℃)

5. Accuracy: ± 0.2 ° C

6. Working size: 200 * 100mm * 6

7. Power supply: 220V ± 10% 50Hz ± 10%

Note: This product can also be customized in different sizes according to customer requirements.

SHJ-6AB usage instructions:

1. Place the flask containing the solution stirrer in the pot or directly place the stirrer in the container.

2. Connect the power supply, turn on the power switch, turn on the timer, turn on the mixing switch, and turn the speed control knob to the desired speed

3. Set the temperature. Press the SET key to set the temperature. Press the SET key to flash the data on the digital display in the lower row (normal measurement in the upper row), indicating that the instrument has entered the temperature setting state. Press the △ key to increase the set value, and press the ▽ key to decrease the set value. Continuously pressing the increase or decrease key will accelerate the change in the set value. Press the SET key again to return the instrument to normal working state, and the temperature setting is complete

4. Correction of sensor errors: When confirming that the displayed value of the instrument is not the correct measurement value, the displayed value can be corrected. Press the SET button for three seconds to enter the inner menu of the instrument. After selecting the parameter SC, use the △ and ▽ buttons to modify this parameter. The correction range of sensor errors is+50 to -50. After correction is completed, press the SET button for three seconds to exit. When the instrument is shipped from the factory, the correction value is 0. During use, it is necessary to prevent correcting the instrument that displays correctly to an incorrect value

5. Start self-tuning. This product can adapt to most control systems. Only when the control effect is not ideal, start self-tuning. Press the SET key for three seconds to enter the inner menu of the instrument. After selecting the parameter AT, use the △ key ▽ key to start self-tuning. At this time, the AT indicator light starts flashing, and the instrument enters the automatic tuning parameter working state. The instrument controls the heating system and fluctuates for the second time near the set point. When the AT light goes out, the self-tuning is completed, and the new PID parameters are locked in the chip,

6. After completing the work, place the speed control knob in the small position, the temperature control switch in the small state, turn off the power switch, and cut off the power.

Changzhou Gaode Instrument Manufacturing Co., LtdIt is a technology-based enterprise that integrates design, production, sales, and service. Strive to achieve perfection and wholeheartedly serve people from all walks of life throughout the entire process. Thank you for your attention! Welcome to further.