Reverse osmosis pure water equipment is divided into single-stage reverse osmosis and two-stage reverse osmosis. The required configuration mainly depends on the customer's needs. The difference between two-stage equipment and single stage equipment is that an additional set of reverse osmosis equipment is installed in the equipment throughout the day. It is best to have the following points when customers request products. In this way, the engineering department can better configure the customer's required products by configuring the plan.

Firstly, what is the water consumption required by the customer for the equipment?

Secondly, what are the standards for the quality of water produced by the equipment?

Thirdly, what is the quality of the customer's raw water? (It is best to have a water quality monitoring report)

Fourthly, what water quality needs to be achieved? What is the required water production rate

Fifth, how much water production should be achieved?

Sixth, which configuration should be high or low? (Different brands of reverse osmosis membranes and pumps)

Seventh, where is the installation location?

Eighth, what is the installation area?

Ninth, what is the installed voltage/current?

Analysis and Explanation of Basic Configuration of Reverse Osmosis Pure Water Treatment Equipment: Tap Water → Raw Water Tank (Function: Used to store tap water and provide stable tap water and pressure for the subsequent pretreatment system) → Raw Water Pump → Mechanical Filter (Function: Effectively intercept large particle impurities, suspended solids, and sediment in the water, reduce the SDI (Pollution Index) value of the water) → Activated Carbon Filter (Function: Used to absorb harmful substances such as odors, residual chlorine, particulate impurities, and organic matter in the water, effectively reduce the color of the water, and improve the taste of the water) → Security Filter (Function: Used to intercept some large particles left after the first two filters) → Primary High Pressure Pump (Function: Provide sufficient pressure for the filter) → Primary Reverse Osmosis Device → First level RO Pure water tank → Secondary high-pressure pump → Secondary reverse osmosis device (function: the main core component of reverse osmosis pure water equipment, used to remove various ions from water) → Secondary RO pure water tank → Water point.

Here are the product configuration quantities:

Water tank (1 unit), raw water pump (1 unit), fully automatic sand filter (1 unit), fully automatic quartz sand filter (1 unit), fully automatic activated carbon filter (1 unit), security filter (1 unit), high-pressure pump (1 unit), reverse osmosis device (1 set), 1RO pure water tank (1 unit), secondary RO high-pressure pump (1 unit), secondary reverse osmosis device (1 unit), secondary reverse osmosis water tank (1 unit), standard rack (1 unit), electrical control system (1 batch), pipeline system.

The above pure water equipment industrial process is only a configuration for general customer needs. In addition to requesting equipment configuration from customers, we also require customer assistance to complete the installation of the equipment.
1. Tap water supply pressure>0.3Mpa, inlet pipe diameter>DN45;
2. The power supply voltage is 380V, 15KW, and the drainage ditch, exhaust hole, and inlet hole are in place;
3. After the equipment arrives at the user, the user shall send personnel to assist in installation and positioning.