Instructions for using a single hard tube fiber optic light source

1. Before use, first confirm the applicable voltage of the instrument, insert the power plug into a suitable voltage socket, and turn on the power switch clockwise(Front panel knob:Plays the role of power switch and brightness adjustment)The instrument will emit light. Adjust the brightness of the light by adjusting the knob.
2. Insert the rear end of the fiber optic cable into the fiber optic socket on the front panel of the instrument, and tighten the fastening pin to start working.
3. There is a compartment door at the bottom of the instrument for replacing light bulbs. Loosen the fastening nail of the small door to open it(Before replacing the light bulb, the power must be cut off and wait for the bulb to cool down before proceeding)Remove the bulb from the slot, remove the old bulb from the lamp holder, replace it with a new bulb, and push it into the lamp chamber through the slot. After confirming that it is installed in place, close the small door and tighten the small door fastening nail.
4. During the installation and use of instrument light bulbs, strict precautions should be taken to prevent contamination with oil and to avoid direct contact with the inner membrane of the bulb by hand. If contamination occurs, a small amount of ether and ethanol mixture soaked in degreasing cotton can be used to wipe it clean.

When the instrument is working or placed, it should be moisture-proof, dust-proof, and ensure the insulation performance of the electrical appliances.

1. The cold light source series products are a new type of product developed by our company based on international market demand, widely used for strong light lighting in the fields of electronics industry, medical care, teaching and research, public security and criminal investigation, agricultural plant protection, cultural relics protection, etc. Due to the use of reliable infrared filtering technology, the visible spectrum has high color temperature and no thermal effect.

1. This series of products uses high-quality electrical components that have been rigorously certified, undergo testing before assembly, and undergo strict quality inspection and fatigue testing for each product before leaving the factory, fully ensuring the safety and reliability of the entire machine.

1. This series of products has a sturdy and durable structure, a suitable and beautiful appearance, low working noise, and can be used both vertically and horizontally. It is flexible to use and easy to operate. We can also provide a complete range of accessories, including single ended and double ended hard tube optical fibers, flexible tube shaped optical fibers, and looped optical fibers.

1. technical data

colour Temperature:3200K Spectral range:450nm—700nm

lamp Bubble:21V150WPhilips durable light bulbRated lifespan200hour

Examples of lens applications can refer to our company's successful cases, or contact us for consultation!