The purpose of the simulated vibration equipment for automobile transportation is to detect the collision and vibration that may occur during transportation, use, storage, and other processes, causing the product to malfunction for a certain period of time, seriously affecting its use and unnecessary economic losses. In order to avoid this situation, we need to know the vibration resistance life of the product or its components in advance.

1、 Standard platform size: Vertical 500 × 500 × 150: mm

2、 Technical parameters:

1. Vibration direction: Vertical (up and down)

2. Maximum test load: 75kg;

3. Frequency modulation function (1-5000Hz): Within the frequency range, any frequency must be within (maximum acceleration<20g/maximum amplitude<5mm);

4. Sweep frequency function (1-5000Hz) (upper limit frequency/lower limit frequency/time range) can be freely set to true standard back and forth sweep frequency;

5. Programmable function (1-5000HZ) 15 segments, each segment can be freely set (frequency/time) and can be cycled

6. Frequency doubling function (1-5000HZ) increases by multiples of 15 segments, ① Low frequency to high frequency ② High frequency to low frequency ③ Low frequency to high frequency and then to low frequency/recyclable;

7. Logarithmic function (1-5000Hz) ①. Down to up ②. Up to down ③. Down to up and then down -3 modes of logarithmic/cyclic;

8. Vibration motor power: 3.8KW

9. Adjustable amplitude range: 0-5mm

10. Maximum acceleration: ＜ 20g

11. Simulate vibration waveform of automobile transportation vibration equipment: sine wave

12. Time control: Any time can be set (in seconds)

13. Power supply voltage: 380V ± 20%

14. Maximum current: 15 (A)

15. Precision: The frequency can be displayed up to 0.01Hz, with a precision of 0.1Hz

16. The maximum acceleration is less than 20g

The maximum acceleration at any frequency should not exceed 20g

17. The maximum amplitude is less than 5mm

The amplitude cannot exceed 5mm at any frequency

18. Acceleration and amplitude conversion: Acceleration=0.002 × F2 × D (F: frequency, D: amplitude, 1g=9.8m/s2)

19. The higher the frequency, the smaller the amplitude

20. Noise level within 60 decibels

21. Applicable temperature and humidity range and noise: temperature -10 ℃~+60 ℃, humidity 10%~95%/noise within 60 decibels;

22. Display amplitude acceleration: If you need to see amplitude, acceleration, maximum acceleration, and accurate numbers, please purchase a measuring instrument separately;

23. Full function computer control: If you want to connect the 485 communication interface to a computer for control, storage, recording, and printing functions, please purchase an interface card program computer separately;

3、 Compliant with standards: Designed and manufactured strictly in accordance with GB/T2423.10-1995 and GB/T13310-2007 standards;

4、 Service commitment: Free home delivery. After the installation and debugging of the equipment is completed, relevant technical personnel will receive free operation training at the user's site, with no limit on the number of people.