By selecting different functional blocks through the intelligent menu, the Climatix DH controller can construct a regional heating station with up to four heating circuits, three pre regulators, and two domestic hot water circuits. Function blocks can be flexibly combined to achieve rich applications. To achieve these, specialized tools or programming knowledge are not required. For OEMs, this has high flexibility, shortens development cycles, and saves development costs. The debugging parameter table can be copied between different controllers, saving debugging time.

·Freely Programmable (SAPRO)

·A graphical editing tool for object-oriented programming (SAPRO)

·Expansion can be achieved by connecting local or remote I/O expansion modules through the peripheral device bus

·The power supply is AC 24V or DC 24V

·8 general-purpose I/O (configurable for analog or digital signal input/output)

·Onboard DC 24V power supply supplies power to active sensors

·5 digital inputs (passive input)

·2 analog outputs (DC 0... 10 V)

·6 relay outputs (normally open contacts)

·The onboard RS-485 interface supports Modbus RTU mode

·Full mode modem RS-232 port for remote services

·Process bus supports indoor temperature controllers and remote HMI (DPSU)

·Up to 3 enhanced communication modules can be configured, supporting BAS building system integration

·The local service interface supports human-machine interface (RJ45) and PC service tool (USB)

·SD card for application and operating system upgrades

·LON fieldbus (only applicable to POL636.00)

·Ethernet port supporting remote or local services, compatible with standard browsers (only applicable to POL638.00/DH1 POL638.70/DH1)

·Working temperature -20... 60 ° C (if there is no built-in LCD-HMI, it is -40... 70 ° C)