UV sterilization furnace2000MM

1： Overview of this device:

It can be used to sterilize and disinfect air and objects. Widely used in hospitals, food, tea, food and beverage processing and packaging equipment, food factories, cosmetics factories, dairy factories, breweries, beverage factories, bakeries, and refrigeration rooms. And it can extend product shelf life and other standards.

Sterilization parameters: UV irradiation sterilization method can effectively kill microwave organisms (such as Escherichia coli and mold) in food or significantly reduce the total number of bacteria, thus achieving food sterilization effect. The key to using these two physical methods for food sterilization is to choose the most suitable conditions and minimize the damage to the original components of powdered food as much as possible, in order to achieve the purpose of sterilization. The results obtained through comparative experiments show that using microwave sterilization technology can minimize the original ingredients of food and effectively control the total number of bacteria and lethal bacteria. Therefore, food sterilizers are more suitable for UV sterilization compared to UV irradiation sterilization methods.

2： Characteristics

This product complies with GB 4789.2, GB 4789.3, GB 4789.4, GB 4789.5, GB 4789.10

Wait for the standards.

Sterilization parameters

3： Equipment body size

1. Equipment total length: 2000mm

2. UV working area: 1000mm

3. Feeding operation area: 400mm

4. Discharge operation area: 400mm

5. Entrance and exit height: 200mm (adjustable)

6. Entrance and exit width: 500mm

7. Conveyor belt to ground: 750 ± 50mm

Four:Equipment main structure

1. Work area tunnel outer body: 1.2mm high-quality stainless steel set, model: A3

2. Inner cavity of work area tunnel: 1.0mm mirror stainless steel plate set, model 212

3. Body support frame: One set of square steel, model: 2 "square steel

4. Air supply system: one set of forced air supply combined exhaust fan

5. Thermal insulation material: vacuum aluminum silicate+silk cotton double-layer model: 60K

6. Conveyor belt: Teflon mesh belt

7. Balance device: Flat water foot cup model: 50 * 12 * 100mm

5： Equipment electrical part

1. Main switch: 15A

2. Total power: 1.5KW

3. Mesh belt inorganic speed regulation range: 0-5m/min

4. Transport motor: 800W

5. Governor: 500W

6. Exhaust fan: CY-125 type

7. Ampere meter: 50A per set

8. Working voltage: 220V ± 5% three wire system 50Hz

6、 Sterilization device　

1. Effective radiation of ultraviolet light source

Lamp length 600mm

2. 16 x 20W UV sterilization lamps are installed in all directions, including top, bottom, left, right, and 360 ° sterilization.

7、 Protective device

1. Overvoltage and overcurrent protection

2. Fault alarm prompt

3. Equipment overload protection