Seismic resistant magnetic sensitive electric contact pressure gauge-Global supplier

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone
Address

509 Datong Road, Binhu Economic and Technological Development Zone, Wuxi City

Contact Now

Seismic resistant magnetic sensitive electric contact pressure gauge

The YXN-M series shock resistant magnetic sensitive electric contact pressure gauge has characteristics of resistance to environmental vibration, medi

Contact Supplier

More Products

Product details

Product Details

YXN-M series shock resistant magnetic sensitive electric contact pressure gaugeHas resistance to environmental vibration, medium pulsation, and impact load characteristics. The instrument indication is clear and stable, the electrical signal switching is reliable, and it has a two position adjustable signal control with upper and lower limits.
The instrument has extremely high sensitivity, fast response, and no lag or jumping phenomenon. When working at low voltage, the contact type device is generally immersed in damping fluid, and its contacts adhere to an oil film, increasing the contact resistance and preventing the contacts from working effectively. The contact system of YXN-M series instruments is vacuum sealed, so the signal switching is reliable, there is no arcing phenomenon, the service life is long, and its switching characteristics are excellent.
The instrument is suitable for low voltage and low current operation, especially for computer users with 24V DC voltage to switch control signals.
The instrument is equipped with YXC-J-220 protective relay produced by our factory, which can meet the conditions of AC 220V use.

YXN-M100 1

Technical Specifications

measurement range Mpa	0～0.16； 0～0.25； 0～0.4； 0～0.6； 0～2.5； 0～4.0； 0～6.0； 0～10； 0～16； 0～25； 0～40； 0～60； -0.1～0.15：-0.1～0.3； -0.1～0.5； -0.1～0.9； -0.1～1.5：-0.1～2.4
accuracy	±1.6％
Using working temperature	-10℃ ～55℃
Use pressure upper limit	2／3
Anti working environment vibration	V. H.4 level
Protection level	If IP65 is required, it must be customized.
Maximum operating voltage	DC 24V
Maximum switch current	250mA
Maximum power (no inductive load)	1W

Schematic diagram of low-power load wiring	Schematic diagram of high and low signal switching (upper limit example)

Usage and ordering instructions:
The working environment should be free of corrosive gases.
After installation, please cut off the protruding rubber plug on the top of the instrument case to allow the instrument cavity to communicate with the atmosphere, in order to ensure the accuracy of the instrument.
Please specify the name, model, and measurement range when placing an order.
Please specify the corrosive environment or corrosive medium separately.
Note: The external installation dimensions and wiring method are the same as those of the YXNC series shock resistant electric contact pressure gauge.

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content