Installation of Weighing ScaleTake physical photos on-site

[Weighing Scale]Installation of

For those that have already been selected[Weighing Scale]For friends of electronic car scales, it is necessary to do a good job in installing electronic weighing scales; AboutInstallation of Weighing ScaleThen it is necessary to choose the appropriate specifications, installation site, and installation infrastructure; Let's talk about the relevant knowledge in this area. The installation of electronic weighing scales first depends on site selection: there should be a suitable and spacious space, and the foundation should have a large bearing capacity.

Secondly, the requirements for bearing capacity on the foundation: construction should be carried out according to different regions and situations, and the bearing capacity of each bearing point must be greater than the maximum overload load that may occur during the measurement process.

We take an 80 ton electronic weighing platform as an example to illustrate: the self weight of its load-bearing platform is 10 tons, and the load on the rear axle of the truck is 50 tons when fully loaded. Assuming an overload of 1.25 times, the impact load coefficient when the load-bearing platform is installed is 1.3, which means that the maximum load on each load-bearing point is W=1/2 (50t × 1.25 × 1.3+1/2 × 10)=43.125t

Again, in the process of foundation construction, it is best to have several load-bearing structures together as a whole. In general, two load-bearing structures can also be built on a single concrete foundation, and the bearing capacity of each foundation must not undergo individual sinking changes under stress.

The bearing capacity of the longitudinal and transverse collision piers is relatively small in the transverse impact force, and can be manufactured according to the dimensions given in the foundation drawing. The longitudinal impact force is relatively large. Taking the 80 ton electronic truck scale as an example: the maximum load of the vehicle M1=80t × 1.25=100t=100000kg, the load-bearing platform M2=10000kg, and the vehicle speed is (maximum) ν 1=10km/h. In order to ensure the installation error of the scale is small and the accuracy of the scale is high, the following requirements are made for the load-bearing points: the levelness of a single load-bearing platform is within 1/500, and the height (horizontal) error between each load-bearing point does not exceed ± 3mm.

Do my friends still have a clear understanding now? If you are unsure, you can contact us by phone:

Phone: Fax:

Let's take a look at the real-life effect of the installation of the weighing scale together;

Engineering Case 1:

Chongqing Longzheng Weighing Instrument Co., Ltd. 24-hour service hotline;