VIP member
Sand and dust test box/Sand and dust test equipment
Purpose: This device is mainly used for testing products such as automobiles, lighting fixtures, high, medium, and low voltage transmission and distri
Product details
Purpose:
This device is mainly used for testing products such as automobiles, lighting fixtures, high, medium, and low voltage transmission and distribution equipment, communications, motors, instruments, and household appliances. During storage, transportation, and use, it is often affected by sand and dust environments, especially for automobiles, lighting fixtures, high, medium, and low voltage transmission and distribution equipment, which are more significantly affected by sand and dust.
This device uses manual simulation of sand and dust environment to test the dust prevention ability of the test sample and meet the IP protection levelIP5X/5KX、IP6X/6KXThe experimental requirements. To evaluate whether the performance of a product can meet the requirements through testing, for the purpose of product design, improvement, evaluation, and factory inspection.
Main parameters:
|
Model
|
WSC(2 m3～150 m3)
|
||||
|
Dust dehumidification
|
Electric heating dehumidification
|
||||
|
Vibrator
|
Set the vibration time and interval time by the controller to make the dust adhering to the wall vibrate and fall, and maintain the required concentration value for the test
|
||||
|
Metal mesh nominal wire diameter µ m
|
50
|
||||
|
The nominal spacing between lines is µ m
|
75
|
||||
|
sample
|
Dry talcum powder and fly ash
|
||||
|
dust concentration
|
2～4kg/m3
|
||||
|
Outer box material of the box body
|
High quality cold-rolled plate spray coating/SUS304 hairline stainless steel plate
|
||||
|
Box material inside the box
|
SUS304Mirror stainless steel plate
|
||||
|
Observation window
|
Equipped with a wiper ash removal device
|
||||
|
Lead hole
|
￠ 50mm, 1 piece
|
||||
|
controller
|
Programmable controller
|
||||
|
light
|
Easy to observe the condition of the samples inside the box
|
||||
|
Main configuration
|
Circulating fan, vibrator, heater, vacuum pump (optional, IP6X/6KX), etc
|
||||
|
Protector
|
Leakage and phase loss
|
||||
|
Power supply (V)
|
380
|
||||
|
Total power (KW)
|
2
|
2.5
|
3
|
4
|
5
|
|
Compliant with standards
|
GB2423.37-2006、 GB4208-2008(IEC60529-2001)、GB10485-2007、GB7000.1-2007 (IEC60598-1:2006)、DIN40050_9-1993(IEC529-1989)
|
||||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-