Product details introduction

Samson 3510 Micro Flow Control Valve
application
The control valve is specially designed for small flow control in experimental devices and scientific research facilities

Nominal Diameter
G, NPT and Rc female thread in 1/8" · 1/4" · 3/8" · 1/2" · 3/4"
DN10 DN15 DN25
Nominal pressure PN40 to PN400/CL150 to CL2500
Process temperature -196 ℃ to+450 ℃

Samson 3510 Micro Flow Control Valve with:
3271-5 type actuator
3277-5 type actuator

The Samson 3510 micro flow control valve body includes:
Single seat valve
Angle valve

The connection forms of the Samson 3510 micro flow control valve body include:
G or NPT threaded connection
Welding end face or flange end face

The standard valve body material is stainless steel, and different types of special materials can also be used according to user requirements

1. Samson 3510 Micro Flow Control Valve Body Options:
1.1 Single seat valve
1.2 Angle valve
1.3 Nominal pressure/nominal diameter: PN/DN
1.4 Connection end: flange flat welding thread
1.5 Valve cover: standard or extended section or metal bellows seal
1.6 Valve Body/Cover Material: 316L Stainless Steel 2.4610 Nickel Chromium Molybdenum Alloy
1.7 Flow characteristics: Kvs/Cv values linearly equal percentage
1.8 Valve core/stem material and guide sleeve/seat material: 316L stainless steel 2.4610 nickel chromium molybdenum alloy
1.9 Surface hardening: Standard Steller hardening
1.10 Valve core and seat leakage level: IV V
1.11 Packing Material: PTFE

2. Samson 3510 microflow control valve actuator options:
2.1 3271-5Pneumatic actuator (3510-1 control valve)
2.2 3277-5Pneumatic actuator (3510-7 control valve)
2.3 Fault Safety Action: Fault Close Fault Open Fault Maintain Valve Position
2.4 Additional Handwheel: None (Plastic Handwheel, Stainless Steel Handwheel)
2.5 Other types of actuators: electric hydraulic

3. The required data for the selection and calculation of the Samson 3510 micro flow control valve are as follows:;
3.1 Pipeline pressure rating? texture of material? Installation location?
3.2 Process medium?
3.3 The state of the process medium: liquid, gas, or vapor?
3.4 What are the maximum flow rate, normal flow rate, and minimum flow rate of the process medium?
3.5 What are the maximum inlet pressure, normal inlet pressure, and minimum inlet pressure of the process medium?
3.6 Minimum outlet pressure of process medium, normal outlet pressure?
3.7 What is the maximum and minimum temperature of the process medium?

4. Locator options;
4.1 Samson 3730-X locator; Action mode option, single action Is it equipped with feedback, built-in solenoid valve and valve position switch, remote locator
4.2 Samson 3725-X locator; Action mode options, single action
4.3 Samson 3731-3/5 locator; Action mode option, single action Is it equipped with feedback, built-in solenoid valve, and valve position switch
4.4 Communication Protocol Options: HART, FF, PROFIBUS-PA
4.5 Explosion proof level options: Exia IICT6, Exd IICT6
4.6 Protection level options: IP65, IP66

5. Filter pressure reducing valve option: None
5Filter pressure reducing valve material aluminum alloy, 1/4 "interface or 1/2" interface
Filter pressure reducing valve material stainless steel, 1/4 "interface or 1/2" interface
5.2 Pressure gauge; Pressure range: 0-6.0 bar; without

6. Valve position switch type and functional options;
6.1 Material of valve position switch; Synthetic resin; aluminium alloy; 316SS stainless steel;
6.2 Explosion proof level of valve position switch: no explosion proof; Intrinsic safety explosion-proof Exia IICT6: Explosion proof Exd IICT6: Rubber sealed explosion-proof
6.3 Bus network: FF with 2 Go Switch SPDT valve position switches
6.4 Bus Network: Profibus DP Valve Position Switch
6.5 Two 4 or 6 SPDT mechanical valve position switches; Silver plated contacts
6.6 2 or 4 SPDT mechanical valve position switches; Gold plated contacts
6.7 2 or 4 inductive valve position switches P+F
6.8 Valve position switch with 4-20mA output
6.9 Valve position switch with 4-20mA output and Hart protocol
6.10 Valve position switch extension shaft NAMUR
6.11 Valve position switch cable interface 2 * 1/2NPT or 2 * 3/4NPT or 2 * 1/2NPT+2 * 3/4NPT
6.12 Valve position switch protection level IP54 IP66 IP67

7. Electromagnetic valve type options; Without; Equipped with single electronic control; Equipped with dual electronic controls;
7.1 Material of solenoid valve; aluminium alloy; copper alloy; 316SS stainless steel
7.2 Explosion proof rating of solenoid valve: no explosion-proof, intrinsic safety explosion-proof Exia IICT6, explosion-proof Exd IICT6, rubber seal explosion-proof
7.3 Electromagnetic valve voltage: 24VDC; 220VAC/50Hz:110VAC/60Hz ; Other voltages
7.4 Types of solenoid valves; 2-position/3-way type
7.5 Electromagnetic valve power consumption: Micro power consumption, 1.8W 3.6W 5.7W 10W
7.6 Electromagnetic valve cable interface 1/2NPT, M20X1.5
7.7 Electromagnetic valve air source interface 1/4NPT,
Is the 7.8 solenoid valve equipped with a manual reset device MO, MS
7.9 Protection level of solenoid valve: IP54, IP65, IP67

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content