VIP member
Salt spray constant temperature and humidity test chamber
Product use: The salt spray constant temperature and humidity test chamber is suitable for testing the performance indicators of aerospace products, i
Product details
| Equipment model | Studio size (D * W * H) mm | Dimensions (D * W * H) mm | |
| LRHS-504-RYGS | 700×800×900 | According to the three views of the contract | |
| LRHS-800-RYGS | 800×1000×1000 | ||
| LRHS-1000-RYGS | 1000×1000×1000 | ||
|---|---|---|---|
| salt fog try Inspection |
temperature range | RT+5℃～60℃ | |||||
| Saturation bucket temperature | RT+10℃～60℃ | ||||||
| temperature uniformity | ≤2℃ | ||||||
| temperature fluctuation | ±0.5℃ | ||||||
| Salt spray deposition amount | 1-2ml/80 cm ². h (16 hour average) | ||||||
| spray mode | Wall mounted spray mode | ||||||
| permanent warm permanent wet try Inspection |
temperature range | RT+10℃～100℃ | |||||
| Humidity range | 85%～98%RH | ||||||
| temperature uniformity | ± 2 ℃ (when unloaded) | ||||||
| temperature fluctuation | ± 0.5 ℃ (when unloaded) | ||||||
| Humidity fluctuation | ±1% | ||||||
| Temperature deviation | ±2℃ | ||||||
| Humidity deviation | ±3% | ||||||
| tall warm try Inspection |
temperature range | RT+10℃～200℃ | |||||
| temperature uniformity | ± 2 ℃ (when unloaded) | ||||||
| temperature fluctuation | ± 0.5 ℃ (when unloaded) | ||||||
| Temperature deviation | ±2℃ | ||||||
|
send use material material |
Cabinet material | High quality 316 stainless steel | |||||
| Studio material | Imported high-grade stainless steel SUS304 | ||||||
| Air saturated bucket | Imported high-grade stainless steel SUS304 | ||||||
| Compressed air pipe material | High quality rubber tubing | ||||||
|---|---|---|---|---|---|---|---|
| Other pipelines | Thickened fluorosilicone rubber tube | ||||||
| pit the heart join in marriage place |
temperature controller | Imported "Youyi Control" brand temperature and humidity instruments | |||||
| temperature sensor | PT100 platinum resistance thermometer | ||||||
| Heating pipe | Titanium alloy heating tube | ||||||
| Circuit breaker | Schneider miniature circuit breaker (prevents control circuit short circuit) | ||||||
| Standard configuration | V-shaped sample holder, round rod, nozzle, funnel, measuring cylinder, mist tube | ||||||
| Safety protection | Overtemperature, overall equipment under phase/reverse phase, overall equipment timing Quick fog removal indicator, end of test, low water level protection, leakage, short circuit |
||||||
| supply voltage | AC380V±10% 50Hz | ||||||
| Power | 10.0kW | 13.5kW | 16.0kW | ||||
| Usage environment | 5℃～＋28℃ ≤85% RH | ||||||
| Note: 1. The test data were measured under good ventilation conditions at an ambient temperature of 25 ℃ 2. The above parameters are for reference only and can be customized according to the specific testing parameters of the user 3. This technical information is subject to change without prior notice |
|||||||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-