host
-Column box temperature: ambient temperature up to 400 ℃;
-Infinite program heating. Resolution ≤ 0.1 ℃, stability ≤ 1 ℃, capable of rising to 300 ℃ at a heating rate of 50 ℃/min, rising from 300 ℃ to 400 ℃ at a heating rate of 20 ℃/min, with a maximum heating rate of not less than 80 ℃/min;
-Fast cooling fan, the temperature can drop from 250 ℃ to 50 ℃ within one minute;
-Can connect up to four or more detectors and three or more injection ports;

Detector: Measurement accuracy: 10%, precision: 5% RSD at a concentration 20 times the minimum detection limit.
-FID detector: used for organic matter analysis, particularly suitable for the detection of hydrocarbons. The detection range ranges from ppm to 10% of C1 and C10 compounds, with a minimum detection limit of no more than 1ppm. The maximum operating temperature of the detector is 375 ℃
-ECD detector: used for the detection of negatively charged compounds, with a minimum detection limit of no more than 20 ppt.
-NPD detector: used for the detection of nitrogen and phosphorus compounds, with a minimum detection limit not exceeding 100ppb

Injection section: equipped with EPC carrier gas control function
-Split/non split injection port: used for direct injection of liquid samples, can be heated to 300 ℃, and can be connected to capillary columns of 0.32mm, 0.25mm, and 0.53; It can also be connected to a filling column.

Auxiliary configuration:
-Built in "ultra quiet" air compressor, stable performance, no maintenance required, flow rate of 250ml/min, 5PSI.
-Chromatography column: 30 meter MXT type stainless steel capillary column with an inner diameter of 0.53mm
-Gas connection components: 1 15 meter copper pipe, 1 dehydration pipe, and 1 deoxygenation pipe

data processing system
-Six channel PeakSimple data system: used for data processing and analysis software.

Other configurations
-Configure portable gas cylinders: one 4L nitrogen cylinder and one 4L hydrogen cylinder each