SQUIX Labeling Arm - High Coding Labeling Machine-Global supplier

2nd Floor, Building D, Huangniling Industrial Zone, Wentang Zaoyi (2) Village, Dongcheng District, Dongguan City, Guangdong Province

SQUIX labeling arm

Can be built on the production line

Labeling arm S1000

Print and paste application

For all barcode printers with peeling function, the labeling arm S1000 paired with the barcode printer SQUIX is a cost-effective solution - it can not only be operated semi-automatic but also vertically built on the production line. Use a lifting cylinder to attach the label to the product.

1) Calculated based on a pressing distance of 100mm, a label height of 100mm, and a printing speed of 100mm/s

Labeling arm S3200

Print and paste application

For all barcode printers with peeling function, the labeling arm S3200 paired with barcode printer SQUIX is a cost-effective solution - it can not only be operated semi-automatic but also built on the production line. The printed labels can be automatically labeled onto the product.

By rotating the cylinder arm, the positioning label can be horizontally rotated in the range of 45 ° -95 °, and the label can be attached to the product by a short stroke cylinder.

Please refer to the labeling arm S1000 for instructions on service life, pre stripping function, pressure gauge, stability, and supporting airflow.

1) Calculated based on a label height of 40 mm and a printing speed of 100 mm/s

Pressure or blow on gaskets can be customized according to the size of the label

Roll on module S5104, S5106

Product labeling applied to conveyor belts. After the sensor detects the labeling position, the printing program starts, and the next label is printed synchronously while the labeling is in progress. The transmission speed and printing speed must be consistent. Use reflective sensors to monitor and locate.

1. Calculated from a label height of 100 mm and a printing speed of 100 mm/s

technical details

Labeling arm S1000

1. Long service life of the product: The cylinder adopts ball bearings, which are wear-resistant.

2. Suitable for different product heights: The lifting cylinder can be labeled at different heights. Provide options for ordering different travel lengths.

3 Barometer: The micro filter can filter out dirt, while the pressure reducing valve ensures that the label maintains good printing quality.

4. High stability: The support airflow, adsorption airflow, and lifting speed of the cylinder can all be adjusted. For fragile products and packaging, the contact pressure can be adjusted to less than 10 N (1 kg).

To avoid accumulation of dirt in the suction duct, air pressure pulses are used for cleaning after each labeling action.

5 Label Size: Suitable for labels with a width of 25-176 mm and a height of 25-200 mm.

6. Supporting airflow: Supporting airflow can assist in fixing labels on the gasket.

Pre peel button

Applied to testing labeling programs. After confirming the assignment, start printing labels and have the labeling arm suck and label them. Press the start button to restart the labeling process.