Nanjing Biaohua Environmental Protection Equipment Factory
Home>Products>Room temperature ozone sterilization box
Product Groups
Firm Information
  • Transaction Level
    VIP member
  • Contact
  • Phone
    13851557490
  • Address
    No. 37, Block Zi Road, Jing'an Industrial Park, Qixia Economic and Technological Development Zone, Nanjing
Contact Now
Room temperature ozone sterilization box
Room temperature ozone sterilization box
Product details

Main purpose:
Ozone sterilization box is mainly used in industries such as pharmaceuticals, hospitals, bioengineering, food and beverage, chemical engineering, etc. to sterilize raw and auxiliary materials, instruments, packaging materials, small-diameter packaging containers, work clothes, etc. at room temperature. It can also be used as an air purification equipment for clean rooms. It is suitable for small goods transfer between different levels of clean or clean rooms and non clean areas. It can disinfect and sterilize contaminated goods and air in a short period of time, effectively reducing the number of clean room doors and preventing materials from polluting the clean room during transfer.

Equipment features:

High quality acid resistant 304.2B stainless steel material, fine welding process, ensuring no ozone leakage.
By using a built-in air pump to evenly circulate ozone inside the chamber, the sterilization effect is good.
Adopting advanced high vacuum stainless steel ozone tubes, coupled with high-frequency inverter power supply, it has the characteristics of high output, low power consumption, stable performance, and long service life.
Time control, ozone working time can be set arbitrarily.

Main technical parameters:

model

Ozone production

Ozone concentration

Whole machine power

Studio size

External dimensions

WH-X-A200

3g/h

≧100ppm

0.75

600*600*600

750*750*850

WH-X-A350

5g/h

1.25

600*600*900

750*750*1150

WH-X-A500

10g/h

1.75

600*600*1400

780*750*1650

WH-X-A1000

15g/h

2.50

850*800*1500

1050*950*1900

WH-X-A1600

20g/h

3.00

1350*800*1500

1550*950*1900

WH-X-A2200

20g/h

3.50

1850*800*1500

2050*950*1900


Production process requirements:

1. The inner and outer surfaces of the box are flat and smooth. (Flatness 5%, smooth)
2. The welding parts are all welded using argon gas protective welding technology, and are smooth without any unevenness.
3. The incoming air should pass through the air inlet without any other external air infiltration.
4. The control system has optional functions such as manual, automatic, timed, interlocked, and alarm.
5. The noise level is less than or equal to 50db.

Online inquiry
  • Contacts
  • Company
  • Telephone
  • Email
  • WeChat
  • Verification Code
  • Message Content

Successful operation!

Successful operation!

Successful operation!