Reaction axe mixer manufacturer, JBJ-1800， Reaction axe mixer price, PAM flocculation tank mixer

Technical parameters of reaction axe mixer and Jiangsu Du'an environmental protection folding paddle mixer:

The bottom of the reaction axe mixer is equipped with this type of mixing equipmentThe mixer is installed at the bottom of the container. It has the characteristics of short and thin shaft, no need for intermediate bearings, and can use mechanical seal structure. It has the advantages of easy use and maintenance, long service life, etc. In addition, the agitator of the paddle mixer is installed at the lower head, which is conducive to the arrangement and installation of accessories at the upper head, especially when the upper head is equipped with a jacket, cooling components, and connecting pipes, which is more conducive to the overall rational layout.

　　Reaction axe mixerPaddle mixer side entry mixing installation Side entry mixing equipment is to install the mixer on the side wall of the container body. This consumes the same amount of powerThe paddle mixer can achieve the best mixing effect. The speed of this mixer is generally 360450r/min, and there are two driving methods: gear transmission and belt transmission. The main disadvantage of the equipment is that it is difficult to seal the shaft.

　　Reaction axe mixerIn addition to the two different types of agitators mentioned above, paddle mixersThere are other types of mixers available for installation. For example, a horizontal container mixer is installed above the horizontal container. This layout can reduce the installation height of the entire equipment, improve the anti vibration ability of the equipment, and improve the suspension state. For example, a horizontal container mixer is used for inflatable mixing.

Technical parameters for the design requirements of paddle mixers and characteristics of starch mixing processingBy comparing the characteristics of the above mentioned mixing installation types, the eccentric mixing installation type is selected, and the driving method is deceleration transmission. The mixer designed in this article mainly consists of the following parts: AC motor, coupling, transmission device, mixer, lifting mechanism of mixing tank, control circuit, and lubrication and sealing device.

Construction and working process:

The JBJ-1800 reaction axe mixer and paddle mixer are shown in the figure, consisting of a mixing shaft, mixing blades, machine base, and driving device‘

When the raw water and coagulant or coagulant aid liquid flow through the mixing tank, flow circulation is generated under the discharge of the mixer, allowing the coagulant to quickly and thoroughly mix with water to meet the requirements of the coagulation process.

Supporting electrical control

Control box can be manually configured with PLC interface or configured according to user requirements.

Ordering instructions:

1. Manufacturing according to the user's size;

2. Indicate the main material, carbon steel or stainless steel;

3. When placing an order, relevant process, civil engineering information, and detailed technical requirements must be provided