Jingtai Instrument Tips:Halogen rapid moisture analyzer, also known as halogen drying method moisture analyzer, halogen lamp rapid moisture measurement experimental equipment, halogen rapid moisture analyzer, halogen desktop moisture detector, halogen moisture analyzer, halogen lamp moisture detection instrument, halogen moisture meter,Halogen moisture analyzerHalogen rapid moisture analyzer, halogen rapid moisture tester, halogen rapid moisture meter, halogen lamp moisture meter, halogen moisture measuring instrument, halogen moisture detector, etc.

JT-K10 Rapid Moisture Content Tester (Laboratory Drying Method) Application Fields:

The Jingtai brand JT-K series rapid moisture analyzer is used in industries that require rapid moisture measurement. It can measure any particle, powder, sheet, or non-volatile liquid, such as the pharmaceutical industry, chemical industry, electronics and semiconductor industry, plastic raw materials, rubber, tobacco, tea, food, starch, feed, coal, molding sand, sewage sludge, dairy industry, and so on. The JT-K series moisture analyzer is an ideal choice for measuring moisture in the production process of enterprises and laboratories.

Working principle of rapid moisture content analyzer, drying method moisture analyzer, and rapid moisture content testing equipment:
Traditional moisture determination generally uses oven drying method, which takes two to three or even three to four hours to test a sample, and also requires weighing with a balance and manual calculation to obtain the moisture value (moisture content) of the sample. The low efficiency of oven method for moisture determination cannot meet the fast-paced production needs of enterprises. The Jingtai JT-K series rapid moisture analyzer is a newly developed rapid moisture analyzer by Taizhou Jingtai Instrument Co., Ltd. It uses a high-power drying heater ring halogen lamp to quickly and uniformly heat the sample, and the moisture content of the sample is continuously dried. Throughout the measurement process, the instrument automatically displays the measurement results in real-time, including sample weight, moisture content, solid content, measurement time, heating temperature, etc.

The Jingtai brand JT-K series rapid moisture analyzer applies the principle of oven drying method, and the measurement results have good consistency with the oven method moisture measurement, but the work efficiency is much higher than that of the oven method moisture measurement. By using the Jingtai brand JT-K series rapid moisture analyzer, samples can generally be measured in just a few minutes, which has been favored and praised by a large number of users.

How to operate the Jingtai brand halogen moisture analyzer?

Many customers have inquired about how to operate the JT-K series halogen moisture analyzer and whether the operation is cumbersome.

The JT-K series halogen moisture analyzer from Jingtai brand is a high-tech moisture analyzer that provides very accurate measurement data, but is extremely easy to use and does not require special training. The operation steps are as follows:

Firstly, evenly place the sample to be tested into the sample tray, then cover it with a heating cover, and finally press the "start" button. The remaining work is automatically completed by the instrument. After the measurement is completed, the instrument will automatically sound an alarm, and the measurement result will be locked on the LCD display screen.

Technical parameters of JT-K10 halogen rapid moisture content testing equipment from Jingtai brand:

Moisture content measurement range: 0.01% -99%

Solid content determination range: 99% -0.01%

Larger weight: 110g

Weighing accuracy: 0.001g

Moisture content readability: 0.01%

Heating temperature: 40-200 ℃

Display content: moisture content, solid content, time, temperature, weight

Display mode: LCD screen with backlight source

Weighing sensor: German imported sensor to ensure measurement accuracy

Temperature sensor: High precision PT100 platinum thermistor

Power supply: Voltage 220V ± 10%, Frequency 50HZ ± 1HZ

Weighing tray size: diameter 90mm

Working environment temperature: 5 ℃ -35 ℃ is better

Dimensions: 380mm × 200mm × 180mm

Net weight: 5.8kg