☆ Product Name: Rapid Cooling, Rapid Heating High Brightness Model Temperature Machine	☆ Product model: HEOT-50	☆ Brand: Hengde
☆ Product Category: Oil Temperature Machine	☆ Temperature control range: 300	☆ Product power: 50kw

Product Introduction

----------------------------------------------------------------------

Description: Cold speed hot mold temperature machine, also known as fast cooling speed hot high gloss mold temperature machine, high gloss steam mold temperature machine. Its job is to use high-temperature steam to create a balanced heating channel on the mold. After the injection molding machine closes the mold, high-temperature steam is blown in to first raise the mold temperature to a set value (usually between 130 ° C and 140 ° C), and then start injecting plastic into the mold cavity. After the injection molding machine completes pressure holding and enters cooling, cold water is injected. The mold temperature quickly drops to a set value before opening, and then air is blown into the mold to completely blow away the cold water, completing the entire injection molding process. The entire injection molding process is collectively referred to as high gloss steam injection molding.
Content: Cold speed hot mold temperature machine, also known as fast cooling speed hot high gloss mold temperature machine, high gloss steam mold temperature machine. Its job is to use high-temperature steam to create a balanced heating channel on the mold. After the injection molding machine closes the mold, high-temperature steam is blown in to first raise the mold temperature to a set value (usually between 130 ° C and 140 ° C), and then start injecting plastic into the mold cavity. After the injection molding machine completes pressure holding and enters cooling, cold water is injected. The mold temperature quickly drops to a set value before opening, and then air is blown into the mold to completely blow away the cold water, completing the entire injection molding process. The entire injection molding process is collectively referred to as high gloss steam injection molding.
Advantages of rapid cooling and rapid heating mold warming machine:
Eliminate surface weld lines, weld marks, ripples, and silver wire patterns on the product.
Thoroughly solve the surface shrinkage phenomenon of plastic products.
Improve the surface smoothness of the product to achieve a mirror finish.
The product does not require painting for subsequent processing, increasing the yield by 20-30%.
Solve the floating weaving phenomenon caused by the shedding of woven products to make the quality more perfect.
Improve injection flowability and enhance product quality and strength through thin-walled molding.
By reducing the injection molding cycle for thick walled molding by over 60%, the flowability and filling effect of the plastic can be enhanced.
95% heat recovery.
***Recycling of media.
No need to connect boilers and other external temperature control auxiliary equipment, omitting complex boiler equipment (safety and environmental approval for high-pressure equipment) and pipeline engineering.
Completely solve the energy consumption problem of unrecoverable steam in boilers.
The small size allows for easy movement and compatibility with different machines, and the non environmentally friendly phenomenon of 180 ℃ hot water completely replacing boilers.
10.4-inch LCD true color LCD display (optional), touch mode Chinese digital input, fully Chinese interface, easy to operate.
The fully closed-loop system controls the detection of input and output temperatures, and feeds back the actual temperature of the mold to the PLC.
High temperature hot water, cold water, air temperature and pressure six alarms, using time and temperature actions to interlock with injection molding machine signals.
The whole machine adopts imported components from Europe and America.
Single and dual channel mold temperature detection (optional), with 316 stainless steel input and output pipelines and multiple sets of input and output interfaces.
Complete equipment configuration; Heating, cooling, and cold to hot conversion control functions.
The recycling system for high-temperature hot water and cooling water has a significant energy-saving effect.