Beijing Jinkun Technology Co., Ltd.: RF Fiber Optic Module: ROF060M
The RF over fiber transmission module ROF060M designed for RF/wireless signal transmission over
long distance, which overcome the problem of high loss when the RF/wireless
signal transmit over coaxial cable or free space.
Profit
1. High bandwidth
2. Immune to RF jam
3. Different wavelength is available 1310nm/1490nm/1550nm or WDM
4. Compact size
Application
1. Radar antenna remote
2. For RF signal transmission over long distance
3. Wireless
signal transmission.
|
4. GPS and |
other kind of navigation signal distribution |
5. EW |
|
Specification: |
Parameters |
unit |
|
Typical value |
Frequency range |
MHz |
|
2200 – 6000 |
Gain |
dB |
|
0 |
Flatness |
dB |
|
≤ ± 3 |
Input 1dB compression |
dBm |
|
≥ -5 |
VSWR |
NA |
|
≤ 2:1 |
Input linearity RF power range |
10 |
|
dBm |
|
-65~-5 |
|
Max input RF power |
dBm |
50 |
|
Noise Figure |
≤30 |
Input/output impedance |
|
Ohm |
Power supply |
VDC |
|
6~12V |
Power consumption |
W |
|
<1 |
Transmitter wavelength |
nm |
|
1310/1550 |
Transmitter optical power |
dBm |
|
0 |
Receiver working wavelength range |
nm |
|
1100~1650 |
Optical connector |
NA |
|
FC/APC |
RF connector |
NA |
|
SMA |
|
|
|
Dimension |
0mm |
85*60*18EnvironmentOperation temperature rangeC |
|
-10 to 65 |
|
( |
Option -40to 85)VibrationPer MIL STD-8108B Method514 -5RF fiber optic moduleUsed to convert RF signals into optical signals, transmit them through optical fibers, and then convert the optical signals into RF signals at the receiving end. It has long distance, high bandwidth, and flat response, and is used in communication and radar systems. In satellite communication, point-to-point antennas can convert RF signals into optical signals through this device, and connect them to control rooms several meters to several kilometers away through optical fibers. Broadcast signals can also be used toRFThe signal is converted into an optical signal and transmitted through optical fibers. The radar system can connect the radar antenna and signal room remotely through this method.
RF fiber optic module
Depending on the bandwidth, there are
8GHz,15GHz,20GHz
Products with different RF bandwidths, and others3GHz, 2.4GHz,
1.5GHz
In the low-frequency range, unidirectional and bidirectional transmission systems can be selected as needed.
advantage
1. High bandwidth.
2. Anti electromagnetic interference
3. Optional different wavelengths of light
1310nm/1490nm/1550nm
4. Anti surge power protection, reliable power environment adaptability
5. Adaptive temperature compensation capability, controlling the stable output of the light source.
6. Compact and small volume
7. Applicable to * * standards
Application scenarios1. Pull the radar antenna far away2. Long distance RF signal transmission
|
3. Radio signal monitoring |
4. Microwave signal transmission coverage |
5. Electronic Warfare |
|
6. Radar signal delay |
parameter table |
: |
|
ROF060M |
parameter name |
unit0 |
|
indicator value |
frequency range |
MHz |
|
2000 – 6000Link gaindB |
about |
flatness |
|
dB |
≤ ± 3.5 |
input |
|
1dB |
Compression point |
10 |
|
dBm |
|
≥ 0 |
|
VSWRNA≤ 2:1 |
*Large input RF signal |
50 |
|
dBm |
Noise Figure |
<35 |
|
input |
/ |
output impedanceOhm |
|
power supply method |
VDC |
6~12Vpower consumptionW |
|
<2 |
(Single module) |
Laser output wavelength |
|
nm |
1310/1550 |
or |
|
WDM |
Laser output power |
dBm>0dBm |
|
Detector operating wavelength |
nm |
1100~1650 |
|
Fiber optic connector type |
NA |
FC/APCinterfaceRF connector type |
NASMA
sizemm85*60*18(Excluding connectors)Beijing Jinkun Technology Co., Ltd.:ROF060M RF Fiber Optic ModuleCommitted to providing customers with precise, accurate, stable, and reliable optoelectronic products and solutions. Beijing Jinkun Technology Co., Ltd. mainly producesMicrowave fiber optic transmission module, RF fiber optic transmission module, RFfiber optic transceiver,Fiber optic delay line,High speed optical switch,Uniform light spot environment,RF fiber optic moduleand other products
